Overview of the technical characteristics of the Galan electric heating boiler

The principle of operation of the Galant electrode boiler

If the Galant electrode electric heating boiler is filled with distilled water, then it will not work, since such water is a good dielectric. For the occurrence of an electric current between electrodes with different potentials, the presence of positively and negatively charged particles is necessary.

In a metal conductor, this role is played by electrons with a negative charge. If you dissolve ordinary salt (NaCL) in distilled water, then as a result of dissociation, positively charged Na + ions and negatively charged CL- ions are formed, and the resulting solution turns into an electrolyte that provides an electric current. As soon as voltage is applied to the electronic heating boiler, the movement of ions will begin with the release of heat.

Galant electric boilers are extremely simple in design. One electrode is the body, which must be grounded, and the second electrode, connected to the phase, is inside the boiler and isolated from the body.

The reviews on the Galant electric heating boiler found on the network characterize it from different sides. Many people wonder why, with such a simple design, the price of the product is so high. It is noted that the coolant in electrode boilers is energized, therefore, it is imperative to use good grounding of the circuit, batteries and the body of the electric boiler. They write that a rather expensive non-freezing liquid is required for its normal operation. Everyone likes the ease of installation and the absence of the need to obtain various permits and approvals.

Installation nuances

The Galan electronic boiler must be installed only vertically. A prerequisite is a two-pipe heating system, in which water with electric current will circulate. If there is no vicious circle, heating will not be possible.

Heating pipes and radiators must be clean, free of foreign objects or metal shavings. It is strictly forbidden to use cast iron. It is recommended to install a simple coarse filter

, which will prevent large objects from entering. Before filling with water, flush the system with a special liquid from the manufacturer.

The protective cap of the boiler is located at the bottom during installation. It is necessary to fix the equipment to one of the walls in the room. Grounding should be done professionally, therefore, in the absence of skills for such work, it is better to contact a specialist. In the process of wiring, it is allowed to use only copper wires. The connection should be entrusted to experienced electricians.

If a thermostat is connected in parallel, it must be borne in mind that a sensor for determining the temperature of the entering water is installed on the outlet pipe, namely, on the last section of the radiator. The outgoing temperature regime can be adjusted by connecting the sensor to the piping that leaves the boiler. A prerequisite after installation is the installation of a 25A machine. It will help to avoid overloading the network during a voltage drop or turning on other electrical appliances.

Technical characteristics of models of electrode boilers Galant

Galant company is constantly modernizing equipment and improving production technology. Electric boilers for house heating produced by the enterprise correspond to their purpose, have small dimensions and are made of materials that ensure high corrosion resistance of the product.The set of products includes various regulators - mechanical and electronic. The price of the Galant electric boiler depends on the power and configuration of the product.

The characteristics of the models of manufactured Galant electrode boilers are as follows:

• power supply voltage of electric boilers - 220/380 v, 50 Hz;
• area of ​​the heated room = 20 - 250 m2;
• power range of models - 2 - 25 kW;
• range of current values ​​for models - from 9.2 to 37 A;
• recommended heat carrier - liquid "Argus-Galan";
• water as a heat carrier - the required resistivity is from 3 kOhm / cm2 to 32 kOhm / cm2 at 150 degrees.

Popular models of electric boilers

* overall dimensions of these models are indicated in units of length * diameter. The technical characteristics of the electric boiler of the Galan Vulcan-25 series allow it to be used in public premises without the consent of the boiler supervision authorities.

Reviews of the owners of Galan products

“This year we decided to stay at the dacha until late autumn. When the temperature dropped to 12 ° C, they thought about installing a heating device. The choice fell on Galan Ochag 3. The installation was entrusted to professionals. It works without interruption, the room heats up quickly and evenly. The only drawback is that it can only function on water with the addition of an electrolyte. "

Mikhail, Volgograd.

“The 3 kW electric boiler was purchased as a supplement to the gas boiler. The husband did the connection independently, in a parallel scheme. We have no complaints about the functioning: when the gas boiler goes out, the electric one completely replaces it. It works on any type of coolant. It should be noted that when buying, we were pleasantly surprised by the price of Galan with a capacity of 3 kW - 4,000 rubles. "

Maria, Saratov.

“After the construction of the cottage, the question arose about the organization of heating. There was no access to the gas pipeline at that time, as a result of which it was necessary to heat the premises with an electric boiler. On the advice of a friend, I purchased the Galan Ochag-3 boiler, which is compact and economical. I was pleased with his work: the house became much more comfortable. I used salted water as a heat carrier ”.

Sergey Grinev, Moscow.

Electric boiler installation

1. The device is grounded and its terminals are insulated. A 25 A current breaker is installed. A coarse filter is connected, after which the system is thoroughly flushed with an inhibitor.

2. Installation of the Galan heating unit is carried out in a vertical position, with the protective cap located at the bottom. It should be noted that it is forbidden to use cast iron radiators together with the boiler, since during operation they will collapse under the action of electrolysis.

3. Connection to the network is carried out using stranded copper wires, not served. Their cross-section is selected based on the current load on the system. There are 2 main schemes for connecting electric boilers:

• The general one is produced in the following order: a thermal electric boiler, a heating unit with a shut-off valve, a temperature relay, an expansion tank, a drain valve, a shut-off valve, a circulation pump with a filter.
• Parallel. In this case, the device will function in conjunction with a gas heating device. The connection is carried out in the following order: a solid fuel device, a radiator unit with a shut-off valve, a temperature relay with a sensor, an expansion tank, drain and shut-off valves, filtering equipment, a circulation pump, Galan electrical unit.

After installation, the entire system should be checked for leaks and the operability of the installed sensors (temperature, control, signal, emergency) should be tested.

Installation diagram

The selection of the main heat source for the creation of autonomous heat supply is a very responsible and meticulous process. In conditions when the gas pipeline does not pass next to the house, one of the available energy supply options is an electric heat source. An excellent solution to this issue will be electrical heating equipment of a domestic manufacturer, in the form of Galant electronic boilers. Their work is based on the physical principle of coolant ionization with further heat release due to the movement of split coolant ions between the electrodes.

• A high level of quality.
• Compact overall dimensions.
• Reliable performance.

Connection diagram and installation of the Galant electrode boiler

Before installing the electrode boiler, you need to make a ground loop, which it is advisable to check for compliance with the requirements of the PUE. An electric heating boiler for heating consumes a significant current, therefore it is advisable to lay a cable of the required cross section and a corresponding circuit breaker. The owner, as a rule, does not need to calculate anything himself, detailed instructions for connecting and installing the heater are included in the delivery set.

The following diagrams are used for connection to heating circuits:

1. standard connection;
2. parallel connection;
3. modular connection of the heating unit;
4. connection of "warm floor".

The most common is the standard and parallel connection of electrode heating boilers. You need to start the installation by choosing the location of the unit. The problem of which boiler to buy for heating a house can be solved very simply. The power of the boiler must provide heating for the dwelling.

Boiler power is selected on the basis of 1 kW per 10 m2 of floor space.

For example, you need an electric boiler to heat a house of 30 square meters, therefore, its power must be at least 3 kW, but if you need to heat a room of 90-100 m2, then, accordingly, the power value is required at least 9 kW. The price for a 9 kW electric boiler will be more than for a 3 kW boiler.

If you plan to install a "warm floor" in the house, then you need a boiler for heating and hot water. It can be an electrode boiler, but its capacity must be sufficient for heating and for heating water in the "warm floor" circuit. In such cases, the heating system pipelines are connected through a manifold and an additional circulation pump is used.

Review of products of the trade mark "GALAN"

Russian-made units are very popular among homeowners due to their affordable cost. One of the leading manufacturers of electric heating equipment is considered to be the Galan trademark, which offers several types of heat generators and control units for them. It is worth noting that the firm produces all electromechanical and electronic controls independently and only for its own equipment.The manufacturer sells its electric heaters without a set of automation, but in this case, it removes the warranty.

Heating installations Galan

The company has existed since 1994 and is engaged in the production and sale of heating electrical installations, automation equipment for them, as well as anti-freezing and flushing liquids used in building heating systems. At the moment, the assortment offered by the company can be grouped according to the following positions:

• heating energy-saving boilers Galan electrode type;
• the same, equipped with heating elements;
• electromechanical automation devices;
• electronic control units;
• ready-made heat carrier for electrode heat generators;
• flushing liquid for heating systems.

Advantages of electrode boilers

The main advantage of the Galant electrode electric boiler is its unique simplicity and high efficiency, which, like other types of electric boilers, reaches 98%.

Electrode boilers are compact and can be installed in places convenient for owners with good access.

The design of the device is so simple that there is nothing to break in it. If high-quality materials that are resistant to corrosion are used, then the service life of the electrode boiler is practically unlimited. The reliability of the product is confirmed by reviews on an electric heating boiler for a home, posted on the network by owners who have already installed this device in their home.

Advantages and disadvantages

Galan electric boilers have certain advantages and disadvantages. This is evidenced by the reviews of the owners of these heating units. The devices are made according to modern technologies. Design features highlight clear advantages over classic boilers with heating elements. The following positive aspects of these heating devices can be called:

1. When installing the boiler, there is no need to purchase additional elements.
2. The installation of such a heating device is cheaper than the installation of devices operating on liquid fuel.
3. Does not require constant cleaning and maintenance.
4. During operation, the boiler does not emit various toxic substances. The units are environmentally friendly and safe to operate.
5. The heating system does not require the installation of a chimney.
6. It is characterized by low weight and compact dimensions. Installation makes it possible to save space. Does not require a separate room.
7. Installation is straightforward. Installation work can be done by yourself.
8. Fire safety.

Like any other heating equipment, it has disadvantages. An analysis of the owners' reviews showed that the disadvantages of these boilers are as follows:

• considerable cost of electrical energy consumed by the boiler;
• can not be used for arranging greenhouse beds, as well as underfloor heating systems. Also, these devices must not be used for heating the pool;
• when installing a heating unit with a power of 10 kW, a permit from Energonadzor is required.

Disadvantages of electrode boilers

In an electrode boiler, one electrode is a body, and the other is an electrode immersed in a coolant. To protect against electric shock, the boiler body must be reliably grounded. But at the same time, the coolant is constantly energized. This is the main disadvantage of the electrode boiler. The second drawback, which is often written about in reviews, is the high cost of such a simple design. But if you buy a heating element electric heating boiler for a house, its price will be almost twice as high as that of an electrode one. And one more significant drawback is the high and constantly growing price of electricity.

Where to buy an electrode boiler Galan

Nowadays it is not a problem to buy a boiler for heating a house, there would be money. An electric electrode boiler can be ordered online with delivery or selected in a specialized store.When purchasing, you must check the availability of the warranty card, instructions and product packaging. It is imperative to ask the store manager about the procedure and procedure for returning a low-quality electrode boiler, as well as the availability of a service network.

Boilers that use electricity to heat water - heating elements, induction (for more details about which you can read here) and electrode have certain features. In terms of convenience and ease of installation, reliability and ease of control, it has no equal among boilers of other types. Of course, if it is possible to connect to gas, then heating will be cheaper, but if this is not possible, then the use of electric boilers is fully justified, both as the main source of heat and as a reserve.

Of course, the best boilers for heating a house are induction ones, because they are devoid of many of the disadvantages inherent in heating elements and electrode boilers. For example, using an electrode boiler, it is difficult to organize a hot water supply system. It is easier and safer to make it if you buy an electric double-circuit boiler for heating a house. It will turn out more reliable, cheaper and easier.

Convenient control based on a microcontroller

A feature of Galan electric boilers, marked with the letter "L", is the presence of a developed system of automatic control of parameters based on a microcontroller. The microcontroller has a non-volatile memory, which makes it possible to ensure the safety of the settings in the event of a loss of voltage in the network. In some cases it is necessary to use a separate voltage regulator for the boiler. Ease of control, the ability to regulate in a wide range of heating circuit temperature make this boiler a very interesting proposition. Special software operating modes can significantly save energy consumption. It is also important not to forget about the boiler automation.

Practical modern Galan boilers are a serious competitor to traditional solutions that use gas as fuel. Economical, built using thoughtful design solutions, using breakthrough technological developments, modern electric boilers are a very interesting alternative and can become a reliable basis for building a heating system for an apartment, a country house, apartment buildings, industrial facilities, public and private institutions.