Comparison of the most popular models of boilers Baxi, Vaillant, Viessmann, Buderus, Protherm
BAXI Eco Four 24
Advantages:
- The boiler design combines two circuits - heating and hot water supply - with a water heater.
- Unification of used energy resources from natural to liquefied gas.
- Automation clearly controls the set mode of operation, adjusting the work to possible changes.
- Low noise from the operating unit, coupled with a stylish design and simple installation.
Disadvantages:
The "smart" system is extremely dependent on the stability of the power supply, which requires the obligatory connection of the unit through a voltage stabilizer.
All gas boilers Baxi
Buderus Logamax U052-24K
Advantages:
- The design of compact dimensions allows you to solve the issues of heating and hot water supply in an apartment or house in a limited space.
- A closed combustion chamber does not change the air conditioning mode.
- LED display with temperature indication for easy operation.
- A number of protective systems - from anti-blocking of the pump to "Anti-freeze".
Disadvantages:
To ensure the normal functioning of all boiler systems, its installation must be carried out by qualified specialists with a mandatory check of all operating modes.
All Buderus gas boilers
Protherm Cheetah 23MTV
Advantages:
- A novelty on the Russian market with forced discharge of combustion waste.
- The heating modules are made of chrome-nickel steel for a longer service life.
- The modulating burner ensures smooth regulation of the boiler power, guarantees efficient use of fuel and favorable efficiency.
- The regulated bypass is combined with a closed expansion vessel, a safety valve and a three-way valve, which protects against overheating and blocking of systems.
- Work in three modes - summer, winter and vacation.
Disadvantages:
Effective for heating rooms with a total area of up to 200 sq.m. When calculating the capacity in conjunction with DHW, it is recommended to use a reduction factor.
All gas boilers Protherm
Viessmann Vitodens 100-W
Advantages:
- Wall-hung condensing boiler with an attractive output range.
- Modern matrix cylindrical burner.
- The automation has a power limitation option with the possibility of installing a room temperature sensor in combination with an electronic control unit for DHW parameters.
- The maximum noise level is 38 dB.
- Self-descaling effect due to the smooth surface of the stainless steel heat exchanger and the possibility of redirecting the movement of flue gases.
Disadvantages:
More complex installation of a condensing boiler with the peculiarities of arranging a coaxial chimney (angle of inclination).
All gas boilers Viessemann
Vaillant VUW INT 242-5-H
Advantages:
- Wall-hung condensing boiler with an attractive output range.
- The choice of consumers who value comfort and increased safety.
- The presence of a modulating burner improves the controllability of power parameters.
- Combustion waste is disposed of through a coaxial chimney.
- Service with front access to the main components.
- Intelligent pressure control in the heating system with automated troubleshooting via diagnostics.
Disadvantages:
The electronic filling of the boiler is very sensitive to power supply fluctuations, and its repair is expensive.
All gas boilers Vaillant
When choosing the best option for you, we recommend focusing on the technical characteristics of the boilers, compliance with the requirements.
For apartment heating, gas boilers Protherm and BAXI are more efficient. They are also suitable for heating a private house, but Vaillant, Buderus and Viessmann will cope better with this.
Our advantages:
- we work around the clock
- we have existed since 1999
- own emergency service
- own service department
- repair of heating of any kind
- repair of water supply systems
- restoration of boiler equipment
- redevelopment and replacement of pipes
DESIGN PRESTIGE LLC reliable partner
Gas wall-mounted heating boilers from the Baxi company
Baxi ranks third in the world in terms of equipment turnover. Its branches are located on the territory of our country, although the main production is concentrated in Italy. It is focused on the manufacture of small and medium power boilers.
Advice! Gas boilers Baxi are perfectly adapted to domestic communication systems. They work even at a reduced pressure of natural gas (up to 5 mbar), although their working pressure is 13-20 mbar.
Other advantages of Baxi equipment:
- the latest models of Baxi equipment are equipped with a self-diagnosis system, which ensures a high level of safety in their operation, that is, in the event of a breakdown, the system stops the operation of the boiler (for example, a burner in the event of a gas leak);
- the units are equipped with electronic modulation of the burner operation;
- full automation of the device's operation allows you to maintain the desired temperature regime without human intervention;
- Baxi equips its product with an LCD display, which makes it much easier to adjust its operation.
Baxi is one of the leading manufacturers of quality wall-hung boilers.
Popular models of Baxi equipment are: Prime HT (Baxi), Luma HT Residential (Baxi), Eco3 (Baxi).
The first version of Baxi products belongs to the economy class, designed for an operating power of up to 33 kW.
The bimetallic heat exchanger ensures the efficiency of the wall-mounted gas boiler up to 110%. It works silently and has two modes of gas combustion.
The second model of the heating device is characterized by increased power (from 15 to 65 kW). Self-diagnosis, electronic modulation, two modes of operation are the main advantages of the Luma HT Residential (Baxi).
Eco3 (Baxi) is a model of a two-circuit wall-mounted gas heating unit. Its power is from 6 to 24 kW. Designed to work with reduced system pressure (up to 5 mbar). Automation allows you to maintain a given temperature regime in the room, depending on environmental conditions.
baxi, proterm or navien what else would you recommend for 100m sq.
If you need a cheap boiler, then of course Proterm, if you decide to invest in an expensive one, then of course Vailant (Proterm, a cheaper trademark of this manufacturer). It makes sense to buy a Baksi only if they sell it to you very cheaply (there are huge discounts on them), a good service network of the advantages, but cheap models such as Main Fore are all rubbish! Navn is generally a temporary cauldron for the harsh punishment of sinners! Everyone who was foisted on it goes bankrupt during operation and loses its nerves with constant and regular breakdowns, and the service service boils down to telephone advice and the sale of very expensive spare parts by mail. Therefore, many throw out Navien without waiting for the end of the first heating season. Viessmann boilers are of absolute German quality and reliability, amazing survivability proven by many years of Russian operation, minus they are more expensive than all of the above.
buderos germany
This is your spread - to compare Baksi with Navien ... Like Opel with Zaporozhets - both rides, but how ... If there is a possibility - take Baksi - excellent boilers of a good company with a very developed service network ...
Five leaders in the production of gas heating equipment
The vast majority of heating gas equipment is represented on the domestic market of climatic equipment by European manufacturers, as well as by some representatives of the Asia-Pacific Economic Community. Among the most popular in our country are the manufacturers of gas boilers from Germany, Italy, the Czech Republic, Slovakia and South Korea.
The first line in the popularity rating is shared by German gas boilers manufactured by the Vaillant Group and. The German brand “Buderus” shares the second place among the most demanded manufacturers with the German holding Viessmann, and the third place is taken by the Slovak concern “Protherm” and the Italian one.
Next, the lineup of each brand, design and operational features of heating devices will be considered.
Protherm Cheetah 23 MOV
Specifications:
- double-circuit boiler;
- an open combustion chamber is installed in it;
- the volume of the expansion tank is 5 liters;
- hot water dispensing capacity is 1.5–11 l / min;
- consumes power in the range from 10.4 to 25.8 kW;
- useful power is 9–23.3 kW;
- hot water temperature adjustable from 38 to 60 ° C;
- overall dimensions (H / W / D) - 742/410/311 mm;
- weight is 31 kg;
- heat exchanger - stainless steel plate;
- works under a pressure of 1–10 atm;
- the consumption of liquefied gas is 1.9 kg / h, and natural gas - 2.73 m³ / h;
- productivity is 90.3%.
Model Description
The wall-mounted heating boiler has a built-in LCD display and mechanical control using buttons. The screen displays the operating data of the device, which allows you to constantly monitor the heating process. Reliable burner made of chrome-nickel alloy.
The control is carried out using a room thermostat. The safety of the device is ensured by built-in sensors for traction control, water consumption, and flame control.
The boiler is equipped with anti-freeze, anti-jamming three-way valve and pump functions. The built-in diagnostic system monitors the status of the device, finds and identifies faults
Advantages and disadvantages
Easy to install and maintain, ergonomic, reliable, compact, works in winter-summer-vacation modes. A large number of service settings allows you to choose the most convenient operating mode.
The disadvantages are low power, high gas consumption, sensitivity to impurities in water. When the water is heated, the heating is turned off and vice versa.
Installation in rooms without a chimney is impossible, for the arrangement of which certain requirements are imposed. Requires additional air supply, cannot be used in a room with forced draft.
Installation and instruction
Upon receipt of the heater, check the equipment, appearance, warranty card and complete operating instructions. Installation, connection, adjustment and initial start-up of the heating boiler should be carried out only by a specialist of the manufacturer.
During operation, the following points must be taken into account:
- repair, replacement of parts or parts of equipment are carried out in special service centers;
- changing the various setting parameters must also be carried out by a specialist;
- all inscriptions on the boiler body must be preserved throughout the entire period of operation;
- Failure to comply with these points during the warranty period enables the company to withdraw the warranty.
Other manufacturers of wall-hung boilers that are in demand in the domestic market
Navien products differ from other manufacturers in their compact size.
These include: Ariston, Navien. Both manufacturers produce quality equipment and at an affordable price.
The most requested series from are Navien Ace Turbo and Ace ATMO. They are adapted to domestic communication systems. The first line is equipped with a system of artificial removal of combustion products, while the second one removes them naturally. Navien products are compact in size, all working elements are made of stainless steel.
Ariston has always cared about the elegance of shapes and the convenience of the sizes of its boilers, therefore its products will perfectly fit into the design of a modern kitchen, while maintaining its useful space. The automatic control system takes full control over the boiler operation.The equipment is reliable, equipped with a modulating pump, a self-diagnosis system, and a multi-stage gas burner.
