Rating of electric convectors in 2019-2020

Using convector heating at home

The operation of the unit is in the passage of cold air masses

through the heating element and the temperature rise. Further, the air simply rises, warming the atmosphere in the room. Some appliances are equipped with fans to help improve air circulation in the room and speed up the heating process.

To raise the air temperature, a high-resistance heating element made of ceramic and hidden in a metal case is used.

Install an electric convector on the walls or floor. If necessary, the device can be easily moved within the length of the wire, for which special wheels are provided on the bottom panel.

Large convectors are placed on the walls and floor, and small ones at the baseboard.

Types of convectors with electrical connection:

• wall appliances;
• floor convectors;
• built-in devices in floor niches;
• skirting units.

Wall types

usually have a lot of power. For their location, a place is carefully chosen, since it is problematic to outweigh them in case of an unsuccessful placement. Very efficient and does not take up much floor space. The disadvantages include the fact that the air enters the middle of the room height and rises, the floor in this case remains cold, so they are placed on the wall as low as possible.

Floor convectors

for heating a house, they usually perform low power, but due to their low location, it is they who heat the air in the room faster. They move well to different parts of the room.

Floor recessed

convectors for the home have recently been in great demand for the organization of heating. They are mobilely placed in special niches that are prepared in advance. Carrying out these changes requires additional funds, but the heating of the room occurs quickly and space is saved in small rooms.

Skirting convectors

produce small power, but by buying them, for example, two, you can most fully warm up the room. They are installed in the area of ​​the plinth, and their height fluctuates up to 15–20 cm. A warm mass of air flows on the floor, which is why the feeling of warmth comes immediately after switching on. Feedback on the use of this type of convectors is positive.

Safety rating

Which pipes are better for heating Pipes for heating a private house - reviews, price

Safety rating is the main characteristic of any equipment. For heaters powered by electricity, this figure depends on two factors:

• electrical protection class (must be at least II);
• overheating protection function.

The device has a higher safety rating, the design of which provides for an automatic system for turning off the equipment in case of excessive heating and reliable insulation of conductive elements. If the heater is protected from water to the extent that it can be installed in a humid environment (IP24), the safety rating will be maximum.

The outer casing of the device is not connected to the heating element. Given this feature, the installation of grounding is not provided. Special fuses protect against possible short circuits. If there are problems with a stable energy supply in a building, for high-quality operation of the heating system, they provide for the installation of uninterruptible power supplies.

Choosing a gas convector

First you need decide on the type of fuel:

• natural gas
• liquefied gas

What fuel is more affordable in the area of ​​your home, we buy that convector. You also need to pay attention for the length of the flue pipeso that its length is at least the thickness of the wall in which you will make the hole. Of course, if necessary, you can contact a specialist to increase the length of the pipe, this is an additional cost.

Gas convectors are:

• with fan
• without fan

It is practical to install a convector with a fan in a room that does not require constant heating. But it is not very convenient to install a convector with a fan in residential premises, since the operation of the convector is accompanied by constant fan noise.
Gas convectors should only be installed by specialists. relevant qualifications. If properly installed and operated in accordance with the instructions, your gas convector will become a profitable, comfortable and safe heater.

Cooper & Hunter CH-MC - the sixth place among the highest quality convectors

A mechanical thermostat is the only thing that distinguishes the CH-MC model from Cooper & Hunter from premium heaters. But it is inexpensive, reliable, high quality. Suitable for heating rooms from 15 to 20 squares. The front panel design promotes natural convection and an even distribution of warm air in the room.

Benefits

• The RX-nano-heateX heating element is made of an aluminum alloy, has a ribbed X-shaped structure, due to which the heating element heats up quickly and provides high efficiency.
• The heating element is protected from dust, the panel does not heat up more than 60 degrees. So the dust does not burn on the heating element and the air is always clean.
• You can turn on the heating at full capacity or use 50% of the resource.
• The device turns off immediately if it overheats or overturns.

disadvantages

After several months, the service may click when turned on or off.

Outcome

The Cooper & Hunter CH-MC convector weighs only 3.7-6 kg (the more powerful the heater, the greater its weight), is installed on legs with wheels, it can be hooked onto the wall - this provides maximum mobility. And you can put the device anywhere, even in the bathroom.

Convectors for heating a private house

Convectors are available with three types of heaters:

• tubular type with aluminum fins;
• needle-like;
• monolithic elements.

Tubular heating element

is a steel tube in which a nichrome filament is installed. The cavity is filled with a special backfill with high heat conductivity and serves as a heat insulator.

Aluminum fins, which are located on the tube, enhance the convection of air currents and provide increased heat transfer. Such an element heats up much lower than, for example, a needle one, which contributes to a long duration of operation without failure. A very economical option.

Some models are splash proof and can be installed in rooms with high humidity, such as bathrooms. The disadvantage is crackling during operation due to uneven expansion when the tube material and aluminum are heated.

Needle type heaters

consists of a plate of non-conductive material. It has a heating thread made of chrome and nickel on both sides. The thread is covered with a layer of insulating varnish. Heating and cooling of the plate with the filament occurs in the same mode. The movement of streams of heated air in convectors with needle heating elements occurs due to the design of the body.

The thread plate has no moisture protection at all and is used only in rooms with dry climates. Such needle-type convectors are not durable. Produced several times less often than tubular and monolithic ones, they are not in special demand among the population and cause not entirely flattering reviews.

Monolithic heating elements in the design of the convector are sold out quickly enough due to their efficiency in operation. They work silently

since the edges on the element are monolithic and extend as one.

The best electric convectors for the home

Ballu BEC / EZER-1500

One of the most interesting and attractive convectors in terms of price / quality ratio. It is powerful enough to heat an average room of up to 15 m2 and is equipped with casters for easy transport. Additional features include ionizer

,
timer
for 24 hours (simplifies use and helps to save), a display on which all settings are displayed, as well as
Auto Restart function
: if the electricity suddenly goes out, then after turning it on, the convector will work at the previous settings - it is unnecessary to re-enter all the operating parameters. In addition, the model received the functions
overheat and rollover shutdown
and also boasts
waterproof housing.
Story! Users only find fault with a few design elements and a short cord, but these are not such disadvantages.

Electrolux ECH / AG-1000MFR

Simple in terms of design and function, but very reliable convector. The power here is average, so a model is suitable for heating small rooms. The manufacturer decided to do without electronic control, timer and other things, but supplied the device waterproof housing, dust filter and air purification system

... Provided function
overheating shutdown
... Users praise the convector for its compactness, quietness, low price, functionality and workmanship, but note that even at the minimum power, the heating is strong enough.

Ballu BEP / EXT-1000

A distinctive feature of this model - glass ceramic front panel

, due to which the convector receives improved heat transfer and the most aesthetic appearance. The device looks, indeed, very stylish - an excellent addition to the high-tech interior. The model received electronic control, display,
remote control, timer
,
frost protection, auto restart functions,
control lock and
overheating shutdown and monolithic heater
... In terms of functionality, appearance and price, this device can be called one of the best electric convectors for the home.

Timberk TEC.E0X M 1500

A great budget convector

, in which there is nothing superfluous. The main feature is availability
monolithic heating element
, which allows for the most efficient heating. In addition, the device is equipped with a function
shutdown when rollover and tumble dryer
... Judging by user reviews, this inexpensive and effective model simply has no drawbacks.

Hyundai H-HV2-15-UI566

Not a convector, but a work of art - this will become a real decoration of the room, and not just a source of warmth. In addition, it is powerful, has waterproof case, turns off when overheated

, but the main feature is the presence
humidifier
... Among the minuses are only a small number of operating modes.

Electrolux ECH / AG-2000MFR

If you need to heat a large space, then you need a powerful convector like this one. It's nice that it's not very expensive either, which was achieved thanks to the use of mechanical control and the absence of unnecessary functions. This model cannot be called primitive: it is equipped waterproof housing, dust filter and multifunctional air purification system

... Overheating shutdown is also provided. Users praise the model for its quietness and efficiency, but the convector is more suitable for those who need to heat a large enough area (about 20 m 2).

Polaris PCH 1502

One of the cheapest convectors in our review

... There is nothing superfluous in it, so you won't have to overpay for unnecessary functions. Average power, mechanical control (but reliable), the model is equipped
waterproof case
and turns off in case of overheating. To find fault with a device with such a price is even somehow indecent, but users do not scold this model - there are only positive reviews.

Timberk TEC.E5 M 1000

This model impresses with its non-standard design and low price. The convector is ideal for heating small rooms, it has waterproof case

and simple controls. It works without much noise, it can be mounted on the wall (like all the other models described, by the way), it economically consumes electricity. There is nothing to find fault with.

Noirot Spot E-5 1500

Noirot is the largest French manufacturer of heating equipment, which guarantees the highest quality, therefore the prices for products are quite high. This heater does not differ in functions from the mass of others, but among its trump cards is excellent build quality, noiselessness and high efficiency, full compliance with the declared characteristics.

A correctly selected convector allows you to quickly warm up the room, it can even be used as an independent source of heat, but then the electricity bills will be higher.