6 popular models of gas convectors

Feature reviews

View gallery
Consumers like that gas convectors can be operated with liquefied or natural gas. To change the type of fuel, it will only be necessary to readjust the gas valve. The convector can be used as a backup or main heat source, while the air temperature in the room warms up to 38 ° C.

Buyers emphasize that they like the choice of power, which ranges from 2 to 6 kW. In appliances of this type for heating, temperature sensors are usually used, which allow you to monitor the temperature regime. If there are interruptions in the gas supply, the valve that blocks the fuel supply will be triggered.

Karma BETA 3 Mechanic Comfort

Main characteristics:

• type - wall-mounted;
• power - 3 kW;
• heated area - 30 - 60 m²;
• Efficiency - 91%;
• heat exchanger - steel, covered with two-layer heat-resistant enamel;
• thermostat - mechanical;
• electric fan - no;
• dimensions (H × W × D) - 600 × 543 × 215 mm;
• weight - 19 kg;
• gas consumption - 0.37 m³ / hour.

Model Description

The BETA 3 Mechanic Comfort models combine all the best features of Beta Mechanik and Beta Comfort devices, including the modern design of the latter. The heaters are produced with a steel heat exchanger and black frosted glass through which you can observe the flame, which allows you to combine the convector with a decorative fireplace.

The heaters of this series are supplemented with a mechanical temperature regulator (from + 13 to + 38 degrees), with the help of which it is convenient to set the necessary parameters. Reaching the set temperature, the device disconnects the main burner from the gas supply, thereby saving energy resources.

The efficiency of the unit is achieved due to the fact that it heats the air and does not waste energy on heating the energy carrier. Beta Mechanic Comfort convectors are universal and can operate both from mains and from bottled liquefied gas. They are also non-volatile, since they do not need power from electricity.

Advantages and disadvantages of the device

Karma gas equipment is compact in size and attractive in appearance, so it will easily fit into any interior. These units are absolutely safe, and at the slightest malfunction in their operation, whether it is flame damping or problems with draft in the chimney, the gas supply is automatically stopped.

Safety and environmental friendliness

The design of the gas chamber and the burner is completely sealed, so the air in the room will always remain clean and unburnt, moreover, due to the high quality and precise adjustment of the unit, it is possible to reduce the level of emissions of combustion products into the atmosphere to the possible minimum.

Such gas convectors do not require the installation of a separate chimney, and the exchange of exhaust gases and clean air takes place using a telescopic coaxial pipe that comes with the equipment.

Performance and reliability

A high level of performance, quiet operation and an affordable price make such equipment very popular among owners of private houses and summer cottages, because convectors are an excellent alternative to more expensive and difficult-to-install heating systems. Such units are not afraid of freezing, since they are not connected with a water heating system.

Long service life of the device is achieved thanks to the steel heat exchanger covered with galvanic composition and two layers of heat-resistant enamel.The equipment is completed with a reliable Italian-made gas valve and burner.

No shortcomings have been identified at the moment.

Additional benefits

View gallery

Consumers note efficiency as the main advantage of gas convectors. Heat losses during the operation of this device are minimized, which saves on space heating. However, there are also disadvantages, as one of them, consumers highlight the need to drill the holes that are required to install the chimney system. It will also require the formation of a branched gas distribution around the house, which is true if the equipment will operate from main gas.

Features of the choice of a gas converter

When choosing the required model, you need to take into account certain operating conditions, study reviews, find out the price, know the area of ​​the room and the highest temperature for heating. A detailed description of all the technical properties and criteria will help you cope with the task of buying the best optimal gas convector.
Like all heating devices, gas convectors have their own characteristics that must be taken into account and understand how to choose the right convector for the home:

• Circulation method. The presence or absence of a fan heater.
• Thermal power.
• Installation option. Floor or wall mounted.
• Drawing method.
• Heat exchanger material. Steel or cast iron.

Floor-standing or wall-mounted gas converters

Taking into account the criterion of saving space and working conditions, it is considered more practical and suitable wall mounted gas convectors... They do not take up a lot of space and, as a rule, are installed on the wall near the window, while an additional heat curtain is obtained between the room and the cold window.

But these devices should be quite light and not create a heavy load on the wall. Wall mounted gas convectors are limited in thermal performance up to 10 kilowatts.

If it is necessary to heat a large number of areas, then use a more powerful floor gas equipment... These devices create more heat energy, but they also have much larger dimensions, as well as significant weight, they need a reliable and stable base.

The price of floor-standing and wall-mounted devices is about the same with similar equipment capacities.

Thermal power

When choosing a gas convector, you need to take into account heated room size... It is this parameter that is considered fundamental in calculating the efficiency of a gas convector. There are a number of methods for calculating the required power.
The main calculation is based on this rule: 1 kilowatt of heat will be consumed for every 10 square meters of premises.

This is universal formula, it is most suitable for standard rooms with a ceiling height of no more than three meters, the usual arrangement of doors and windows and good insulation.

If more careful calculations are needed in poorly insulated or non-standard premises, then you need to contact the professionals.

Gas converter heat exchanger material

The operation of the convector is based on the combustion of gas in the thermal chamber of the equipment, and the heat exchanger inside is exposed to a powerful thermal effect, the burnout of the heat exchanger quickly disables the device. That is, of course, the material of manufacture simply must be as stable and durable as possible.

In this case, the clear leader is cast iron. The cast iron heat exchanger is thermally stable, the service life of these gas convectors is more than 50 years.

Another advantage of a cast iron heat exchanger is slowest cooling and even heat distribution. The disadvantage, judging by the reviews, is a lot of weight and a high price.

Steel convectors with a heat exchanger at a cheaper and lighter price than cast iron.But when buying, you need to pay attention to the quality of the steel, this gas convector can last at least 30 years.

Which gas-fired convector to choose

View gallery

If you are interested in gas convectors for summer cottages, then you must first decide on the type of fuel, which was discussed above. It is important to consider whether liquefied or natural gas is more profitable in your region. It is also important to pay attention to the length of the gas outlet pipe, because this parameter should not be less than the thickness of the wall where you will make the hole.

When choosing a specific model, it should be borne in mind that some of them have a fan. If you plan to install the convector in a room that does not require constant heating, then it will be more practical to use equipment with a fan, whereas, as for residential premises, it is better to purchase a model without a fan, since it will work without making any noise at all.

Efficiency of a gas convector

Once again about efficiency. According to the law of conservation of energy, when heating a dwelling, heat loss must be compensated. Any heater in a separate room will consume an equal amount of heat and energy when heating. Naturally, to get this energy, you need to use fuel, the prices of which are very different. Comparing an old uneconomical boiler with a modern convector, you need to pay attention to efficiency.

Simply put, in order to get the same amount of heat, different appliances spend different amounts of fuel. The amount of fuel used depends, first of all, on the loss of heat, which is not spent on heating the room, but for extraneous unnecessary purposes. For example, for a gas boiler, this can be heating the air leaving through the exhaust pipe. With poor quality equipment, if the gas does not completely burn out, the burner smokes, of course, you should think about replacing the boiler with more modern, high-quality or at least serviceable equipment. Heat loss can also occur in the pipes if the boiler is located in a very cold room or in a draft.

Analyzing the above, the question arises, which of the two compared equipment has the highest efficiency. What is the most economical?

There is a third option - an electric heater. He has no exhaust gases, no heat loss through pipes, he does not smoke, heats only what he is intended to heat, spending kilowatts only for this purpose.

If we compare gas convectors and boilers with each other, we can assume that their efficiency is approximately the same, because the principle of their operation is approximately the same, and it will not be possible to save gas with any of these devices. Also, we can say with confidence that a working good water boiler will have a higher efficiency than a gas convector, for the simple reason that water removes heat better and faster from the heat exchanger than in a gas convector the air removes heat from the heat exchanger.

Recommendations for choosing a specific model

View gallery

If you are considering gas convectors for summer cottages, then you need to pay attention to some models of such equipment. For example, "Zhitomir-5 KNS" will be able to cope with heating a room with an area of ​​23 m2. Additionally, it will be possible to install a convector of the AKOG-2.5 brand in the rooms, which has a cast-iron heat exchanger. This decision must be followed if you want to sleep in silence. However, in this case, you will have to overpay about 1800 rubles.

Quite often in country houses today you can find gas convectors on bottled gas for summer cottages of the "Uzhgorod AKOG-4-SP" type. This option perfectly heats the room, but over time it can lose its attractiveness in appearance. However, consumers emphasize that this does not affect work efficiency in any way.

For owners of suburban real estate who often live in such houses, the DEMRAD NGS-30 gas convector, which does not have a built-in fan, is perfect. Two rooms, each of which has an area of ​​16 m2, it will be able to heat. Gas heaters-convectors for summer cottages are quite often chosen by consumers for the reason that they do not require grounding when connected, in addition, the price also attracts, which is 6500 rubles.

To fully warm up the house, it will be enough to turn on the equipment and leave it. After 12 hours, the house will warm up evenly. For more efficient operation, it is recommended to connect the equipment to the mains, so as not to worry about the need to change cylinders. Owners of houses with three rooms claim that heating with such a convector will be very profitable. But if the house is slightly larger, then it is better to take advantage of the possibility of installing boiler equipment.

Sistema LLC

Feedback on some selection criteria

View gallery

Considering gas convectors for summer cottages, it is necessary to pay attention to a number of criteria.For example, to determine the required power, a formula is used, which says that a kilowatt of power will be required for every 10 m2 of floor space. This is true if the ceiling height does not exceed 3 m. Consumers advise to add 1 kW to the calculated power, which will be required so that the equipment does not work for wear and tear, and the owners have the opportunity to ventilate the premises by opening windows and doors.

Gas heaters for summer cottages (convectors) must also be selected taking into account the material of the heat exchanger. The most durable, according to buyers, are devices with cast iron combustion chambers. They allow you to achieve uniform heating and have a higher efficiency.

Consumers also see the disadvantages of such devices, which are expressed in heavy weight compared to counterparts with steel chambers. Among other things, such a unit will cost about 50% more, and devices are produced in a fairly limited power range, varying from 2 to 5 kW.

If you prefer a steel appliance, then its power can be equal to 12 kW. Consumers say such heating appliances look better, are cheaper, but less durable. It is impossible to ignore the type of chimney when choosing. There are many models on sale with a telescopic coaxial pipe, which makes it easy to adjust the length. In the case of horizontal chimneys, they can have different diameters, depending on the power of the device. Consumers are advised to choose units that have a chimney with a decorative outer casing, because this gives the equipment an aesthetic appearance.

What will the pond be like?

- There is such a rule: if fish with the prerequisites to reach large sizes are grown in a small aquarium, then it will remain small. How big should the pond be for the carp to grow?

- Fish are mobile, they like to swim and play a lot. The more spacious the reservoir, the better. In depth, the pond should reach at least 1.4 m, and in length and width 3 × 2.5 m. In favorable conditions, pets grow up to 90 cm, live in captivity for up to 35 years. In their homeland it is even longer - over 100 years.

- In what place of the site is it better to make a pond and with what plants to populate it?

- Place the pond on the south side, but so that it is shaded from direct sunlight. Firstly, in the sun, the water can quickly heat up, and carp need a temperature not higher than 21-24˚С, and secondly, warm waters will provoke the growth and development of unwanted algae. I planted a sedge and a nymphea in the pond. Knowing that carps are big hunters to dig in the ground, I firmly fixed the plants in containers, and put large stones on top.

- And what will the fish breathe if there are no fontanelles or flowing water in the pond?

- Aeration is required to maintain oxygen levels at the proper level. It is achieved by installing a special device - an aerator or a simple fountain or waterfall. In other words, the water mirror should fluctuate all the time - this means that gas exchange takes place, carps will be able to breathe. Another condition is the purity of the pond water. If the pond is not flowing, it is necessary to clean the water with a filter. The water in the pond is not changed during the whole season. The water must have a neutral reaction - from 7 to 7.5 pH, an allowable decrease is up to 6 pH.

Photo: Shutterstock.com

Reviews of some models of gas convectors: Alpine air NGS-30F

View gallery

The aforementioned gas convector for a summer residence, the reviews of which are the most positive, costs 25,400 rubles. It has a cast iron heat exchanger and ensures high quality continuous operation. A fan is built into the case, which, according to buyers, helps to accelerate the spread of heat.

The work is controlled by a mechanical system. Customers love that the dimensions of the device are quite compact and equal to 630 x 230 x 460 mm.The equipment weighs only 27 kg, while the power is 3.75 kW.

Reviews about the convector brand Hosseven HBS-12/1

View gallery

If you are interested in gas convectors for a summer residence, which one is better, the reviews will allow you to understand. Among others, consumers choose the model that was mentioned in the subheading above. It is used to heat various premises. Their area can reach 96 m2. Consumers emphasize that this equipment has stable legs, and you can observe the burning of the flame through a window made of heat-resistant glass.

The thermostat of this device is mechanical, which indicates its durability. But this is not a complete list of advantages, among others it should be highlighted:

• ease of management;
• vertical chimney;
• open combustion chamber;
• piezo ignition;
• insignificant gas consumption, which is 1.12 m3 / h.

The principle of operation of gas convectors, their types, description.

Gas convector... Minimum costs - maximum heat dissipation.

Gas convector - an innovative development in the air heater system. An excellent alternative to the main or additional heat source. In the case of apartment use, it effectively smooths out thermal discomfort during the off-season. Natural gas convectors allow you to save up to 70% of utility bills, minimize fuel consumption in the event of warming or departure.

Cylinder gas convectors(Alpine Air NGS-40) are used in rooms without centralized heating. In the presence of a transition kit, most of the models presented can operate on both mainline and liquefied gas. Owners of country houses, cottages, summer cottages, garages, warehouses and outbuildings prefer gas convectors heating due to the following advantages:

• Safe operation. Unlike boiler equipment, convectors are not subject to "freezing", do not need constant heating and can be used irregularly.
• Operational savings. Alpine Air, Hosseven, Karma are new generation convectors that combine European quality and adaptation to Russian climatic conditions. Comparative analysis confirms that gas convector buy much more profitable than an electric fireplace or an electric oven. The original design of the equipment allows you to effectively heat the air through a heat exchanger, therefore the level of efficiency is 90%, and heat loss is practically reduced to zero.
• Simplicity of installation work. There is no need to carry out the piping of the heating system, only the gas supply pipe and the chimney are installed.
• Low maintenance (annual preventive inspection is recommended). The service life is about 50 years.

Gas convectors heating in assortment.

The online store provides modifications, various in price range and functionality:

• With a closed or open combustion chamber.

If it is impossible or undesirable to install additional ventilation, it is recommended to install with a closed combustion chamber gas convector, price which is comparatively higher. The closed combustion cycle is safe for health and ensures the safety of oxygen in the room. When using an open chamber, the exhaust gases are discharged due to the draft in the chimney.

• With and without built-in fan.

Depending on the operating conditions, it is possible to install equipment with forced (Hosseven HDU-3V FUN) or natural convection. A convector without a fan is electrically independent and works on the principle of natural air supply.

A gas convector with an exhaust fan has a comparatively better efficiency and allows gas to be consumed more economically.The fan heater contributes to uniform heating of the room, protects the equipment from overheating.

• With vertical or coaxial horizontal chimney.

In the presence of an open combustion chamber, enhanced ventilation and the installation of a complex vertical chimney that passes through the ceiling and roof are required. Combustion products from the closed chamber are discharged through a coaxial chimney, which, together with a decorative cap, is included in the convector set. Owners using gas convector, reviews leave about it as a completely silent equipment that does not pollute the atmosphere. Simultaneously with the outlet of the gas exhaust through the inner pipe through the outer part, cold air is drawn in, which automatically begins to warm up through the annular space.

• With thermostat.

The thermostat (built-in or remote) allows you to maintain a stable thermal regime in the room. For example, the range of automatic support of the Karma Beta or Hosseven convector is from 13 to 38 degrees. The thermostat turns off the burner when a certain temperature is reached and turns it on in case of threshold cooling, cuts off the gas in case of an unexpected flame extinguishment. Automatic control of the convector operation saves gas consumption and increases the service life of the equipment as a whole. The thermostat ensures safe autonomous operation of the convector during the absence of the owner.

Wall-mounted convectors installed under the window perform an additional function of a heat curtain between the room and the cold outside air. Floor-standing equipment is characterized by significant weight and volumetric dimensions, therefore it is often used in large commercial and industrial buildings.

Criteria for choosing a gas convector

The site contains model lines Alpine Air, Hosseven, Karma, Aton with a detailed description of each position (dimensions, power, heating area, etc.). Everything gas convectors heating:

• Equipped with hermetically sealed combustion chambers, heat-resistant heat exchangers (steel or cast iron) and reliable automation from European manufacturers.
• They are accompanied by quality certificates and permits.
• They are distinguished by modern design.

When choosing a model, it is recommended to take into account the area of ​​the room, ventilation features, thermal insulation characteristics, the number of windows and the maximum indicator of the expected required temperature. If used natural gas gas convectors, it is necessary to determine the nominal pressure level in the gas pipeline (the efficiency of the heater depends on this indicator). If necessary, it is possible to install several convectors in one room.

I would like to note the versatility of the work LPG gas convectors... By connecting several cylinders and connecting them with a gas train, a complete heating system is obtained. They are absolutely independent of the source of electricity, do not require a gas mains connection and are capable of heating even in severe frosts, since reliability and efficiency, automation, everything is created for confident and long-term operation. They are the best suited to our, far from greenhouse climate.

Due to the variety of design solutions, gas convector can become an inconspicuous heater or a bright element of the interior. In the presence of standard models of compact sizes and fireplace-type convectors. We provide reliable equipment that will become a source of warmth and comfort for many decades.

If you have any questions, you can always consult the specialists of the store www.obogrevatel-mag.ru. Thanks to your extensive work experience, you will receive a competent and comprehensive answer.

Read more:

Gas convector. Description

Go to the product category "Gas convectors"