Gas water heater: Neva, Vilant, Ariston, turbocharged

Geysers Ariston - products of the Italian brand of the same name, have been popular in Russia since the 90s. Affordable cost that attracts Russian consumers is achieved through the location of production facilities in China. The technique is adapted to specific operating conditions - the possibility of low water pressure and its increased hardness are taken into account. Ariston instantaneous water heaters are distinguished by a large range of performance - the brand presents a range in which you can find an option for any need - from low-power versions to models that can simultaneously serve several points of water intake.

About company

Ariston is an Italian brand that has been supplying Europe with gas equipment for hundreds of years. The company's products are renowned for their quality; the assortment includes a wide variety of household appliances - from dishwashers to water heaters. The headquarters are located in Fabriano. After rebranding in 2005, the name of the company changed to Indesit Company. This concern, in addition to Ariston, owns the brands Hotpoint, Indesit and Scholtes. Today Ariston ranks third in the world ranking of household appliances sales.

How to properly operate a gas water heater: basic operating rules

There are various types of gas water heaters. In some houses, you can still find gas water heaters from Soviet manufacturers, which are already obsolete and require special knowledge during operation. As a rule, such units are capricious when turned on. These geysers are turned on by manual ignition, and this process is quite complicated and responsible. Modern gas water heaters are fully automated, and no special skills are required to turn them on. Now let's talk about everything in order.

What do the Ariston models have in common?

Ariston gas equipment supplied to Russia is assembled in China. The relocation of production facilities had a favorable effect on the cost of the speakers, and their parameters fully comply with European quality standards. The products are distinguished by their reliability, maintainability and well thought-out design. Common to all brand modifications:

Simple classic design.
Compact design.
Equipped with security systems. Gas control, traction and temperature sensors, overheating protection are provided. The system allows you to prevent an emergency in case of any malfunctions in water supply and gas supply.

All equipment on sale has test settings - they are set in production according to standard operating parameters. After purchasing the equipment, each owner can adjust it in accordance with the specific parameters of pressure and head. You can do it yourself - just read the instructions. If in doubt, contact the service department - specialists will professionally perform the setting. This will not only ensure efficient and comfortable operation of the device, but also extend its service life.

Possible malfunctions of the water unit

There are malfunctions and malfunctions in the operation of the instantaneous water heater, which clearly indicate the failure of the structural elements of the gearbox. These include:

refusal to turn on the column;
the flame is not ignited the first time;
there is a water leak from the reducer;
after closing the DHW tap, the flame does not extinguish.

Malfunctions indicate the following probable breakdowns and malfunctions in the "frog":

Diaphragm ruptured - the average service life of the diaphragm is 5-7 years.Over time, due to constant mechanical stress and hard water, rubber breaks through. A sign of membrane failure is that water is dripping from the gearbox.
The membrane has become coarse - the quality of the water unit of the gas column depends on the elasticity of the diaphragm. For operation, it is important that the membrane is sensitive to any changes in the water pressure. If the gasket is hardened, the column will respond with a delay. After closing the DHW tap, the gas burner continues to work for some time.
Plugged stem - when the membrane breaks through, water enters the metal surface of the stem, causing it to corrode. Rust interferes with normal needle movement. Symptoms of malfunction: it is difficult to start the column. The flame is ignited only under strong water pressure. After closing the DHW tap, the burner does not go out.
The coarse filter is clogged - a mesh is located at the entrance to the gearbox, which quickly clogs, especially if the connection conditions were violated and the piping scheme was completed with errors. Malfunction symptom: difference in pressure at the inlet and outlet of the water heater.

Pros and cons of Ariston speakers

Benefits:

Quiet work. During ignition and operation, there are no extraneous sounds and clicks.
Temperature stabilization in different modes.
Copper heat exchanger - durable, resistant to temperature extremes and scale.
Manufacturing and assembly are carried out using European technologies.
Spectacular design.

Disadvantages:

Shutdown when pressure drops in water supply tubes. This disadvantage is especially noticeable on the last floors of apartment buildings.
There is a doubt about the durability of the components - the Chinese assembly affects.
The high cost of spare parts. If the equipment breaks down, it is more profitable to buy a cheaper analogue from less well-known manufacturers than to change the unit that has failed.

When choosing a model, consider the need for hot water volumes, the number of water intake points and your budget. The price of inexpensive versions is up to 10,000 rubles. But they are not durable. To purchase a reliable speaker with durable components, you need to pay an order of magnitude more.

Gas column Ariston Fast EVO 14b

Helena
We bought this model to replace our old Vector gas water heater, and I must say that we were not mistaken in our choice. Column Ariston Fast EVO 14b heats water perfectly, is able to maintain the set temperature. The water seems to be heating quickly. During the year of operation, nothing broke or leaked, despite assurances that the quality of Ariston equipment has recently dropped dramatically. We may be lucky, but so far everything works fine and without interruptions. There are minor errors, but it seems to me that any column has them. In any case, this device is of higher quality and more reliable than dubious Chinese counterparts.

Advantages:

Simple design, no frills and frills;
A minimum of adjustments, it is enough to set the temperature, and the column itself will maintain the set temperature;
It keeps the temperature well with small changes in pressure in the pipes;
The ignition is carried out without loud bangs.

Disadvantages:

During the year, the batteries were changed four times, and on cheap batteries it refuses to ignite normally;
It is impossible to set a fixed temperature, therefore, with the onset of cold weather or heat, the heating has to be adjusted.

Model overview

Ariston Fast Evo Series

Two modifications are presented with a productivity of 11 and 14 liters per minute, respectively Fast Evo11b and Fast Evo 14b. These are automatic speakers with electric ignition - to maintain the function, you need two batteries, which last for a couple of years. Temperature constancy is maintained by a flame modulation system. There are devices:

Type C. Here the front panel is equipped with a digital display - to control the set parameters.If the settings are incorrect, the screen will display an error code - having looked at its meaning in the instructions, the user adjusts the device for specific parameters. Management - push-button.
Type B. There is a mechanical handle - to switch the temperature mode.

Advantages of modification 11b:

Works at two points of water intake.
Ignition at minimum head.
Stable outlet temperature.

Cons of 11b:

Unpresentable design.
Users note a humming sound with a small flame, which disappears when fully burned.

Advantages of modification 14b:

Stylish design.
Minimum adjustment - only one temperature mode is set.
Temperature stability.
Quiet ignition.

Cons of 14b:

Battery replacement.

Marco Polo series

The series is represented by two models - Gi7S and M2. Both are discontinued. Flow heaters. Turbocharged system. No chimney. Closed combustion chamber. The pipe is brought out into the street - the combustion products are removed through a window or a hole made in the wall. Installation of such devices is carried out after an appropriate permit issued by the gas supervision. Both models have an open combustion chamber. Polo power Gi7S - 22 kW, M2 - 18 kW. Productivity, respectively, 11 and 10 l / min. Such devices are valuable for rooms without a stationary chimney. The disadvantage of the series is its volatility. The fan is powered by 220 V.

DGI 10L CF Superlux

Budget version. The assembly is Russian. Mechanical control. Automatic electric ignition - batteries required. Productivity - 10 l / min. Estimated cost 7,000 rubles. Technical specifications:

The maximum heating is 75 ° C.
Power 19 200 W.
There is a gas control system. Overheat protection.
Chimney type.
Gas consumption - 2 cubic meters m / h.

It can operate on any type of gas - natural or liquefied. There is a winter-summer switch. Wall mount. Vertical layout.

Storage heaters

Storage water heaters are presented in two modifications:

Ariston SGA 200.8650 watts. Open combustion chamber. Heating +75 ° С. Tank capacity - 195 liters. It ignites automatically. There are indicators - heating and switching on. There is a thermometer. The container is covered with enamel inside. Works on any type of gas. Protective gas control system. Vertical installation. Outdoor type. Magnesium anode. Dimensions - 49.5 × 170x35 cm.
Ariston SUPER SGA. Capacity 100 liters. Dimensions 95 × 49.5 × 51 cm. Tank cover, installation and other points are similar to the previous model.

Italian storage water heaters with natural draft provide the house with hot water for any volume of consumption and regardless of the temperature of the incoming water. They are used both in everyday life and in industry. Pluses of SUPER SGA:

Adaptation to Russian conditions - they work stably at low parameters of gas pressure and pressure in water supply pipes.
High-resistant enamel on the inner surface of the tank is an exclusive development of the company.
Three security devices. The water heater is equipped with a thermocouple, temperature and flue gas sensors.
Serial or parallel connection.
Fuel economy.
Effective thermal insulation - reduces heat loss by 20%.
Magnesium anode.
Piezo ignition.
There is no electrical connection.
Robust steel body.
There is a regulation and indication of temperature.

Geyser Ariston Marco Polo Gi7S 11L FFI [turbocharged]

Hot water - comfort available to everyone

The new flow-through gas water heater Ariston Marco Polo Gi7S with a closed combustion chamber will provide you and your family with an almost unlimited amount of hot water. Ease of use and economy, Italian design and high reliability achieved through the use of exclusive technologies and high quality materials - all this is the Marco Polo Gi7S from Ariston!

full adaptation to Russian conditions - stable operation at reduced inlet pressure of water and gas
gas instantaneous water heater with a closed combustion chamber
work from the electrical network 220v
electronic ignition
maintains the selected temperature when the water pressure changes
special copper heat exchanger with "copper jacket", which allows to reduce heat losses by 10-15%
smooth ignition
ionisation flame control providing instant gas shutdown in case of flame failure
possibility of conversion to liquefied gas
modular layout and easy access to components from the front
Italian design and compact size

The model, which combines functionality, compactness and elegant design, is intended for both city apartments and country houses.

Why does a modern person need a gas water heater?

A gas water heater is a somewhat simplified term. In everyday life, this is usually called a complex and high-tech unit designed to quickly heat large volumes of running water. If a city apartment building is not connected to a hot water supply network, then installing an instantaneous gas water heater is the only way to get hot water in the volumes necessary to meet the needs of a modern family.

For a small city apartment, a narrow (only 35 centimeters wide) model Marco Polo Gi7S with a power of 19.8 kW is suitable. It provides 5 to 11 liters of hot water in one minute. A large country house, in which up to 3 points of water sampling can work at the same time, will require the installation of a more powerful model, or the use of a storage gas heater with a volume of 100-200 litas. All models of the Marco Polo series are equipped with devices designed to maintain the set water temperature. Safety is ensured by special systems of automatic blocking of the gas supply when the water stops and when the draft in the chimney deteriorates. Ignition methods: electric from a 220V network.

The microprocessor control system precisely maintains the selected water temperature, ensuring even heating regardless of the number of points of consumption.

The sensor control unit is unique; it is rarely used in devices of this class. One of its functions is the setting of a fixed flow rate, it makes it possible to limit the amount of water, completely entrusting the process to automation.

With its help, you can dial, for example, a bathtub for bathing a baby without human control.

Briefly considering the principle of operation of this type of Ariston columns, we can say that at the moment the hot water intake starts, after the start-up automatics are triggered, the working burner ignites. From this moment, water is heated, passing through the shell side of the heat exchanger, made of high quality copper. At the end of the use of water, the burner goes out, the column goes into standby mode. Ariston MARCO POLO GI7S 11L FFI is a gas instantaneous water heater of a new generation with a closed combustion chamber. This model has the function of maintaining a constant temperature of heating water, touch display; smooth power control; two-stage overheating protection; automatic heating for frost protection; setting a fixed water flow rate (bath filling signal); low noise level; economical gas consumption; the possibility of changeover to liquefied gas. MULTI-LEVEL SECURITY SYSTEM. The highest quality workmanship and the latest engineering solutions guarantee maximum reliability and ease of use of the device!

Gas water heater guarantee 2 years.

Every year millions of consumers around the world choose Ariston products. This tremendous trust yields an important result: a brand that takes responsibility for meeting the needs for well-being, comfort and safety, the combination of which determines the quality of life.

Ariston Marco Polo Gi7S gas instantaneous water heater with a closed combustion chamber

This is a premium speaker at an affordable price, a novelty from Ariston.It significantly expands the scope of conventional gas water heaters thanks to a closed combustion chamber, which makes it possible to install it not only in houses with conventional chimneys, but also in cases where there is no standard chimney, weak draft of flue gases, or insufficient supply ventilation.

Ariston's Marco Polo Gi7S provides instant water heating and ease of use. The new model is equipped with a touch control system that allows you to set and maintain the optimum temperature. The water heater prepares 11 liters of water per minute, while it is able to control the flow of water and give sound signals - for example, when filling a bath. Thanks to its modern Italian design, Marco Polo Gi7S will harmoniously fit into any interior. And the low noise level will help keep your home calm and quiet. The water heater is completely safe to use: the device is equipped with a fan for forced smoke removal, has an automatic electronic ignition, a comprehensive protection system and an auto-diagnostics function that warns of any possible malfunctions, has frost protection, optimally adapted to work in Russian conditions. Marco Polo Gi7S provides the ability to work with both natural and liquefied gas.

The reliability of the device and ease of use are due to the following features:

Compact dimensions.
Ultra-modern appearance.
Stainless steel body.
Touchscreen informative display.
Electronic ignition from the 220V network, the use of which greatly facilitates the process of starting the device.
Intelligent control and constant temperature maintenance.
Low noise level.
The absence of a constantly burning igniter, which additionally saves energy.
Closed combustion chamber, built-in fan.
The emission of combustion products into the room is minimized.
Setting a fixed water flow rate (bath full signal).
Water flow regulator to maintain the water temperature when the pressure in the water supply changes.
Separate adjustment of power and maximum water flow.
Autodiagnostics system.
The ability to work on natural and liquefied gas.

Defence from:

freezing;
overheating (temperature sensor, fuse);
long use (more than 30 minutes)

The Ariston gas water heater is made in a traditionally thoughtful Italian design, which has its own uniqueness and aesthetics, which is typical for Ariston household appliances.

Functions and features

1. Elegant appearance.

During the surface treatment, a number of high finishing technologies were applied, due to which the water heater fits well into any design of a modern kitchen. Compact design and small size save space.

2. Intelligent control and maintenance of constant temperature

Based on the data on the temperature and flow rate of the water, the microcomputer maintains the temperature of the supplied water at the set level using a proportional valve.

3. Intelligent three-section combustion chamber.

The microcomputer selects the most suitable combustion section based on the signals from the flow meter and the water temperature sensor.

4. Closed combustion chamber, highly efficient heat exchanger.

The air intake and fan are located at the back, which ensures safer combustion and high efficiency of the TP2 heat exchanger.

5. Intelligent bath mode.

(limited water consumption) The microcomputer controls the temperature and water flow. When the set flow rate is reached, a sound signal is given; after turning off the water or heater, the microcomputer switches it to standard mode.

6. LCD display.

The multifunctional LCD display of the water heater displays various parameters and modes: water temperature, water consumption, key functions, as well as error codes, which ensures ease of use and maintenance.

7. Multilevel security system.

Automatic shutdown on loss of flame: if the flame is extinguished during operation, the gas supply is automatically shut off to prevent gas leakage. Thus, safety and reliability are ensured.

Long-term use protection: the gas supply and the burner will automatically shut off after continuous use for 30 ± 3 minutes. If you need to use the heater for a longer time, close the hot water tap for a few seconds and open it, then reignite.

Forced ventilation: a high-quality fan ensures safety through continuous smoke extraction (DC motor, continuously variable power control).

Protection devices against overheating, against high water pressure, against freezing, against stopping the fan, as well as the impossibility of turning on the heater in the absence of water or a blocked smoke exhaust system ensure stable and safe operation of the heater.

Control Panel

The general range for setting the temperature of the water heater is 35-70 ° C. If the temperature is between 35-48 ° C, then pressing the temperature setting button will increase or decrease the value by 1 ° C. At the end of the adjustment, the set value flashes for 3 seconds, then the current water temperature is displayed. If the temperature is between 50-70 ° C, then pressing the temperature setting button will increase or decrease the value by 5 ° C. At the end of the adjustment, the set value flashes for 10 seconds, then the current water temperature is displayed.

Features:

A closed combustion chamber eliminates the need for a conventional chimney or avoids problems with insufficient draft by using a fan to forcibly evacuate combustion products through a coaxial chimney.
Air for the burner is also supplied forcibly, which not only ensures the stable operation of the column, but also allows you to solve the situation when there is no supply ventilation, or it is insufficient.
A simulated gas burner regulates the power of the column depending on the water flow rate, which ensures its constant set temperature regardless of consumption.
Convenient electronic ignition from a 220 volt network.
Productivity with a water temperature difference of 25 ° C is 11 liters per minute.
Touch control and LCD display.
Maintaining the set temperature.
Built-in frost protection.
Self-diagnosis system.
Reduced noise level.
Water flow limiting function (convenient when filling the bath).
Modern design.
Possibility of reconfiguration to liquefied gas.
Stainless steel cladding.
The heat exchanger is made of copper.

Protection systems:

Two-stage overheating protection is implemented through a temperature sensor, and if it is suddenly faulty, then the fuse is triggered.
Ceramic heating elements are used for frost protection.
Turning on and off the column is controlled by a water flow sensor.
Water filter.
Ionization flame control (gas shutdown when the flame is extinguished).
Flue gas control sensor.
Fan failure monitoring.
Water flow control.
Overpressure protection - relief valve.

To ensure long-term and trouble-free operation of a gas flowing water heater (gas "water heater") and maintain its performance, it is necessary to regularly inspect, maintain and maintain.

An extraordinary cleaning of the gas flowing water heater (gas column) may be required more often than once a year, in case of intensive operation of the water heater in a room with a lot of dust in the air. This can be visually determined by the changed color of the flame of the pilot and main burners of the gas flow water heater. If the flame turns yellow or smoky, this indicates that the burner is clogged with dust particles from the air, and it is necessary to clean and maintain the gas column. The flame should normally be blue.

Malfunctions

Do not rush to send the device for repair to a service center, some problems are solved on their own. For example, replacing batteries. The nature of the faults can be judged by the number of indicator flashes:

The constant burning of the light indicates that it is time to replace the batteries.
A single flash of the indicator indicates a malfunction of the microswitches.
Double flashing of the indicator indicates the need to replace the temperature sensor.
A triple flash indicates the absence of a flame during ignition - an electrode for ignition and a sensor that controls the flame are suspected.
Four flashes of the indicator indicate a malfunction of the gas valve.
Five flashes indicates overheating. Check the condition of the chimney.

The geyser does not heat the water well

This can happen for several reasons.

The simplest reason is incorrectly selected gas water heater... You have saved money and bought a low power heater that is unable to meet your hot water needs.
The second reason is the low gas pressure in the pipes (in the apartment). Call gas workers to check the system.
The third reason is the usual blockage (jet, filters, scale, hoses, etc.), some types of which are described above. You can check this by the color of the fire, which changes from time to time. This is evidenced by the presence of soot.

You can only adjust the temperature and clean the column yourself.

One of the important knots is the water unit of the gas water heater or "frog". The regulation and safety module is installed in semi-automatic and automatic flow-through gas boilers. A faulty gearbox is reflected in burner startup failures, failure to turn on and other irregularities.

How to repair a water heater?

The duration of the operation of the gas water heaters is affected by the quality of the water. In case of minor malfunctions, you can cope with the repair on your own. Classic malfunctions of gas-fired water heaters:

The appliance does not turn on or turns off after a short time - "symptoms" indicating that scale has accumulated in the heat exchanger. It needs to be cleaned with a special product.
You cannot get hot water at the outlet - most likely the radiator is leaking. Another option is incorrect adjustment of the water or gas supply.
The burner does not ignite. Check the draft - the chimney may be clogged.

The gas column does not ignite

The failure of a water heater can occur for many reasons. We will list the most likely ones:
The simplest reason for this trouble is the lack of normal draft in the chimney. If the chimney is clogged and there is no "draft" in it, then the column may not ignite.
To check for a malfunction, you can bring a piece of newspaper, a napkin or a lighted match to the chimney. If they flutter, then the cravings are in order. Otherwise, you will need to clean the chimney.
If the device (only in units with auto-ignition from batteries or an electric network) does not ignite, then it is all the fault of the discharge of the batteries or the malfunction of the wires, the igniter unit. Eliminated by inserting batteries or checking the electric ignition system.

Failure of the igniter system can occur from poor pressure water. Open any tap with cold water and check the pressure, if it is weak, then you can call the ZhEK and find out what the problem is.

Prevention and elimination of malfunctions

If you use a moderate heat - up to 40-45 ° C, you can avoid limescale in the radiator. If the problem cannot be avoided, you will have to clean the radiator. To rinse it, you will need tools: flat and cross screwdrivers, open-end wrenches, gaskets and a hose, special descaling powder (you can use vinegar). Cleaning technology:

Remove the cover and fittings.
Cut off the water supply at the entrance. Open the nearest hot water tap.
Unscrew the supply pipe from the radiator, take it to the side.
Pour about 1 liter of water from the heat exchanger.
Put on the hose at the radiator inlet - pour the descaling compound through it. This should be done gradually. Cleansing will take 3-4 hours. To speed up the process, you can heat the active substance by turning on the igniter.
At the end of the cleaning, the liquid is drained. The scale will come out - the pressure will increase.

A radiator is an expensive item. Replacing it is costly. If there is a leak, the heat exchanger can be soldered at 180 ° C. We need a 0.1 kW soldering iron. Leaks often appear on the outside of a heat exchanger made of cheap material. The microcrack is cleaned with sandpaper, wiped with a rag with solvent and sealed. Before brazing, the water is drained by blowing out the remaining drops using a compressor or vacuum cleaner.

Water heater leaking

If you see similar spots on your column, then be sure that it is leaking and needs repair.

This malfunction can occur mainly in gas water heaters that have been operating for a long time. The two main reasons for the leak are:

The radiator is leaking.

Tubes (bends) or gaskets in the joints are cracked. Replacing a radiator or taps is quite expensive. Therefore, there is a reason to repair the gas column on your own. For repairs you need:

screwdrivers (cross and regular);
open-end wrenches (set);
solder with rosin;
vacuum cleaner;
solvent;
"Skin".

Sealing holes

Due to the harsh operating conditions, the radiator or bends can burn out and holes appear on them. If you have determined where the leak is, then you can repair the small hole with an ordinary soldering iron.

Preparing the gas water heater for repair

Drain all liquid from the system - open only the hot water tap, unscrew the nut on the cold water inlet pipe, and most of the water will flow out;
Remove the radiator completely;
Examine the entire tube. - if you see "greenery" - clean and inspect these places for cracks.

Soldering the heat exchanger does not always give good results, here a lot depends on your skill. If the soldering is poor, the heat exchanger will quickly flow again.

When you have found the leaks, you need to do the following:

clean the holes found with a "sandpaper" and immediately wipe it with a cloth and solvent (this will remove the remaining grease, carbon and dirt);
using rosin with solder, tin this place with a 100 watt iron (in the absence of rosin, use aspirin);
rub the crack or hole with solder, and after it cools down, add more tin (the layer should be 1-2 mm).

Defective gaskets and tubes

Replacing flexible hoses of this type does not require special skills; anyone can do it with a wrench.

Very often, leaks are formed in the places where the outlets are connected to the outside of the heater or to the internal assemblies of the column. All connections are made by "American" with gaskets inside.

Due to constant heating / cooling, the rubberized liners either melt or lose their properties and harden. Cracks appear in them, along which water flows. If you notice a gas column leak in such connections, then replace the gaskets. Using a wrench (mostly 24), unscrew the nut and replace.

It also happens that the flanges on the pipes crack over time - in this case, you need to replace the entire pipes.

Connecting a gas water heater to the water supply: organization and documentation

The first thing that needs to be done is to contact the housing and communal services and ask for a plan for the removal of water, gas and smoke. If a gas appliance has already been installed in the room, then you still have to get a plan in order to determine exactly where the appliance should be installed.

If you need to connect the gas water heater to the water supply, it is better to seek qualified help from the master

As soon as you receive all these plans, you will need to go to the city's gas service with a statement, which will indicate a request to replace the old device with a new one. The application must be accompanied by a request for the repair or replacement of the gas pipeline and water supply. After all the replacement and repair work has been completed, the owner must get his hands on the certificate of the work performed and the column installed in its place.

A more complex process will be to install a gas appliance in a new location. Such work involves changing the location of all the necessary pipes and, accordingly, the chimney.

In order to carry out this work, the following documents will be required:

Column installation project;
Model name and technical data sheet desirable;
Chimney condition document;
A number of documents that prove ownership of the property;
A statement that will indicate the request for reorganization;
Application for petition for construction work.

After all the documents are confirmed and signed, the workers will carry out the installation work, set up and connect the column. Upon completion and after sealing the meter, you will need to obtain an act from the technical supervision and the fire service, as well as a separate document in which it will be approved that the device can be used. In the end, it will be necessary to contact the BTI so that a new project of the premises can be introduced there.

How to deal with defects in washing machines

Some defects of the washing unit identified during operation can be eliminated. When a knock appears during the spinning process, this means that it is necessary to change the bearings of the washing drum.

It is not easy to do this on your own, since it must be squeezed out of the case. This is done carefully so as not to disturb the original condition of the washing drum. You can use a special mandrel or do the work with a hammer and chisel carefully. The new bearing is installed in place of the remote bearing.

When malfunctions occur in the programmed control of the unit, this is a sign of a breakdown of the electronic module. There are two solutions: replacing it by purchasing a similar one at the service center yourself, calling the wizard, paying for the call and installation of a new module.