Gas boiler Baxi - manufacturer information and model overview

The choice of equipment such as a gas boiler is always taken seriously.

The cost, as well as the important role that the device will play, forces all options to be carefully studied.

Having thought of purchasing a Baxi gas boiler, most likely you are looking for information about the manufacturer, models and user reviews. We offer a complete overview.

Briefly about the company

Baxi is a brand from Italy that has been producing heating and hot water equipment for 50 years. The company offers users a wide range of its products: classic wall-mounted and condensing gas boilers, floor-standing units with a cast-iron heat exchanger, electric water heaters. These are modern, high quality and reliable products that meet all regulatory requirements.

At the moment, the company produces about half a million units of gas boilers in one year, including the popular series: Luna, Main, Slim. Since 1993, when the company received the ISO 9001 quality certificate, its products have been highly appreciated by consumers.

BAXI S.p.A. was founded in 1924 by the Austrian Westen family. The company began to manufacture gas boilers in the period from 1978 to 1984, when it was part of the Zanussi group. Since 2009, the company has been part of the BDR Thermea group, and its boiler plant is the center of the holding. The total annual output is about half a million wall-mounted appliances.

Features of Baxi boilers

We are talking about high-tech equipment with excellent basic characteristics. At the request of buyers, additional elements can be included in the package, which will make the device even more functional.

The manufacturer offers the following devices:

1. Timer. Wall-mounted and floor-standing boilers "Baksi" can be programmed so that they work at a time specified by the user. Thanks to this approach, the cost of heating is reduced: when there is no one at home, the equipment will automatically turn off.
2. Room thermostat. This accessory is required for indoor climate control. Its use is very simple - the desired temperature is set on the display, and the heating device independently maintains it. When the desired value is reached, the device turns off. When the temperature drops by one degree, it will start working again.
3. Outside temperature sensor. Thanks to this element, the boiler will be able to react to changes in the weather. The technology is needed to maintain an optimal temperature in the house, while reducing gas consumption.

Thanks to these accessories, the final cost of heating is reduced, and heating of the home becomes many times more efficient. In addition, these elements will facilitate the operation of the device.

Benefits

Among the vast variety of heating equipment, the Italian company Baxi occupies a worthy place. If we compare the gas equipment of this company with the products of other companies, it will become clear that the models of this brand are the most technologically advanced and functional. At a minimum, they can be used not only for heating purposes, but also for preparing hot water. That is, this is a 2 in 1 device. The brand catalog contains many models that have minor differences in technical parameters.

Among the advantages of the Baksi units are the following:

1. Electric ignition. One minute is enough to heat up the boiler, and the minimum power is used for this. As soon as the equipment is ready, it starts to work at maximum.
2. Automatic regulation of flame power. Thanks to this, the room will always be kept at a comfortable temperature.It also has a beneficial effect on the service life of the device, because constant on-off switching often becomes the main reason for the failure of devices.
3. Post-circulation system. For this, the equipment is supplemented with special accessories that reduce the consumption of electricity and gas.
4. Simple installation. Floor or wall installation possible. The device itself has a robust and reliable design, despite its low weight.
5. Environmental friendliness. During the operation of the installation, when the fuel burns, a minimum amount of carbon dioxide is released into the air.

Heating technology has proven itself well when working in premises for various purposes: from country cottages and apartments to industrial buildings. Due to the fact that gas boilers are able not only to heat housing, but also to prepare hot water, they make life much more comfortable. This property is especially important if a person lives in an area remote from centralized engineering networks.

disadvantages

If we consider the negative qualities of Baxi gas equipment, we can only single out its high cost. It is explained by the quality of the products. You need to understand that heating equipment is an important element on which the comfort of living will depend. Therefore, experts do not recommend saving on the purchase of a high-quality unit.

Some types of devices must be installed in a specially designated room - a boiler room, which must be properly prepared. If you do not have the skills to work with gas boilers, then the installation should be entrusted to specialists.

Prices for a range of gas boilers Baxi

gas boiler Baxi

Safety in Baksi boilers

Before you buy a device, you should understand its design in more detail. Heating systems of this brand usually have an additional circuit, so they can be used not only for heating, but also for hot water supply. The Baksi gas boiler is perfect for a private house where autonomous communications are required. The price of the equipment depends on the model, power, options and functionality.

The gas boiler is equipped with an electronic ignition system. Such ignition is completely safe for others. Also in the system is a closed combustion chamber. Actual data is displayed on the LCD - so the owner can get information about the operation of the equipment. Gas boilers are equipped with an ionization flame control function. The boiler is equipped with an ionization electrode.

Ionization flame control technology is essential for the safety of the user. The gas boiler runs on natural fuel, which can explode if handled carelessly. This can be caused by the extinction of the flame. But this will not happen in Baksi boilers. Accidents most often occur when the gas flow rate exceeds the combustion rate. What is called the "separation" of the flame occurs. The ionization electrode eliminates this phenomenon. It is connected to the burner control. If the ion flow is reduced, which indicates that there is no flame, the burner simply shuts down.

Russian gas pipelines have low gas pressure, so the flame can go out due to lack of fuel. However, Baxi boilers are adapted to Russian conditions, they can work in such networks. Low gas pressure will not cause malfunctions and breakdowns. The manufacturer has foreseen all this. The equipment has undergone rigorous testing and has proven that it can function in problematic communications. The boiler also has a water filter - the quality of the environment in Russia still leaves much to be desired. / P>

Types of units by type of heat exchanger

Devices are single and double-circuit. The former are capable of heating water only for the heating system, while the latter can serve as a flow-through gas column. Accordingly, different heat exchangers are installed in them.

Primary

Such elements are always tubular, in the form of a monometric device located under the burner.This copper component is responsible for heating the coolant.

Primary elements are installed only in single-circuit boilers, but they are not as common as units with two circuits, due to the slight difference in cost.

All Baxi heat exchangers are made from high quality materials - copper and brass. They are specially processed, which makes them reliable and gives them high physical characteristics.

Secondary

They are lamellar heat exchange surfaces. Energy transfer is carried out by means of sanitary water. The elements got their name because of their shape - these are stainless steel plates combined with each other.

A secondary heat exchanger is needed for the boiler to work both for heating and for the DHW system (hot water supply).

Bithermal

These copper elements function on a tube-in-tube basis. They are designed to heat the coolant for the heating system and hot water supply. They effectively heat water, but they definitely require that the coolant be of high quality. If the liquid is supplied with a lot of impurities, then the thin pipes quickly become clogged, as a result of which the efficiency of the boiler decreases.

How to choose a Baxi gas boiler?

The approximate power of the boilers is taken at the rate of 1 kW per 10 m2 of housing area. However, such calculations are very approximate and do not take into account the degree of insulation and heat loss through the windows. In addition, they are not suitable for double-circuit boilers also because it is necessary to lay the power consumption for heating water.

Double-circuit boilers must be purchased if the house does not have hot water supply in principle. In case of seasonal and emergency shutdowns, it is better to purchase a separate water heater (instantaneous or storage).

For hard water, it is advisable to choose the ECO series, where the heat exchanger will not be as severely affected as in other models.

Types of boilers by the method of removal of combustion products

The fuel is burned in a special chamber, which can have a different design. For each type of boilers, the furnace has its own characteristics, on which the efficiency and conditions of use of the unit depend, namely, the place of its installation.

Turbocharged

Any boiler needs oxygen to operate. In such units, a forced draft fan is responsible for the air flow. Compared to other boilers, turbocharged ones require a special chimney consisting of two pipes: air enters through one, and smoke is removed through the second.

Often, units of this type are used in conditions of insufficient free space, where it is not possible to equip a classic chimney. A distinctive feature is that turbocharged boilers are produced with low power - up to 35 kW, which is explained by the presence of a copper chamber, which requires gentle operation.

Atmospheric

This type of boiler is suitable for houses with a chimney over 130 mm in diameter. The chamber is open here, and combustion products are removed naturally. Often this type of instrument is called "atmospheric".

The flue pipe of the Baxi boiler has a diameter of 121–122 mm, therefore an aluminum corrugation with a diameter of 125 mm can be used as a pipe. This element is not afraid of high temperatures (up to + 400 ° C) and easily stretches up to 3 meters. An alternative option is to install a stainless steel chimney, but this will cost a little more. The design of the atmospheric unit does not provide for the installation of a turbine.

The device of a double-circuit gas boiler Baksi

Baksi gas equipment based on Grundfos or Wilo circulation pumping equipment has a built-in diaphragm expansion tank, equipped with a Newwell gas valve and a reliable safety group in the form of an automatic air vent and a safety valve device with a pressure gauge.

The device of a double-circuit boiler Baksi

The equipment consists of 25 main units

As “smart” elements, the equipment uses control of the temperature of the hot water circuit, flame and draft, as well as a protective system that prevents the boiler from freezing and blocking the circulation pump.

Varieties of wall-mounted boilers "Baksi"

Based on the name, it becomes clear that these units are mounted on the wall. There are no strict requirements for the installation process. The boilers are easy to operate and have a large power reserve. Available in several types.

Condensing

A certain part of the generated energy of such boilers leaves with water vapor. But here it is necessary to take into account the moment that the formed steam condenses. For this process to start, the combustion products must be cooled to a temperature of + 55 ° C. This function is performed by the water inside the boiler. It cools the combustion products and then enters the system. For condensing boilers, there are certain requirements for the amount of temperature heating of the coolant.

When compared with traditional units, condensing units can achieve savings of about 11%. Products differ not only in efficiency, but also in environmental friendliness - they can be installed even in residential premises. They work almost silently.

With one circuit

This type of boiler only heats the water that circulates through the heating system. If desired, the unit can also be connected to hot water supply, but this will require an indirect heating boiler.

When buying such a boiler, you need to take into account the volume of the chamber, based on the number of people living in the house. Units from "Baksi" with one circuit have a power parameter from 14 to 31 kW, which is quite enough to warm up a country house with an area of ​​no more than 400 m2.

With two contours

Double-circuit installations are in demand if you need to prepare hot water in a short time. Heating the liquid does not affect the operation of the heating system. A key feature of boilers with two circuits is the presence of two heat exchangers. One is copper, which transfers heat from the unit to the radiator. The second prepares domestic hot water and is created from the plates.

A heat exchanger that heats water is a minor element. Water is supplied to it as needed. Models are available with different types of heat exchange elements.

Recommendations before buying

Heating boilers are technically complex devices, in order for the equipment to serve for a long time, you need to know how to properly handle it. The delivery set of each model necessarily includes an instruction, which contains recommendations for installation and safe operation.

The Baxi brand produces several lines of boilers and, in order not to overpay, first of all, you should decide on the required power and volume of heated water. If pressure drops occur in the system, this must be taken into account, not to mention other operational features.

For example, it makes no sense to buy an expensive and high-power unit for heating a small house. For such cases, the Baxi ECO Four model is suitable. If you need a small but powerful rig, Nuvola 3 is worth a look.

In the selection process, you need to pay attention to the following criteria:

1. Power. To do this, you need to know the area of ​​housing and divide this figure by 10.
2. Volatility. More expensive models do not depend on the availability of electricity. Of course, the issue with the supply of electric current can be solved by installing an uninterruptible power supply.
3. The presence of water heating. Then you need to buy a double-circuit unit.
4. Boiler type at the place of installation. Floor-standing and wall-mounted units are available.
5. Heat exchanger material. To increase the service life, it is better to purchase a boiler with copper or stainless steel elements. There are also cast-iron heat exchangers, but they are rather fragile and heavy, but they perfectly resist corrosion.
6. Heating system type. Centralized or autonomous.
7. Correspondence of the chimney and combustion chamber.

You can deal with these questions yourself, but with a lack of knowledge and experience, it is recommended to contact a specialist who takes into account all possible nuances. Buying a Baxi gas boiler is not a problem if you know which model is needed.

Possible problems and malfunctions

So far, the world has not invented an ideal technique that would not fail. If the Baxi boiler does not work as before, this may indicate some kind of malfunction. As a rule, minor problems are solved on their own, because taking the boiler to a service center is not an easy task. If the skills are not enough, it is better to immediately call the master at home.

List of common problems and solutions:

1. The power of the flame in the burner has decreased. Most often, this situation occurs when the pressure in the system is incorrectly set. Another reason is a broken gas valve modulator or diode bridge. To get rid of this problem, you need to correctly configure all the system parameters, adhering to the instructions attached to the boiler, or replace damaged components.
2. Turning off the boiler immediately after starting. The problem occurs when the pressure in the gas pipeline is low. It is solved by adjusting the gas pressure to the lower side - 5 mbar.
3. The coolant is poorly heated. It is necessary to check the pressure parameters on the gas valve. Most often, this problem occurs if the values ​​of min and max are out of order.
4. The modulation is out of order. The valve will need to be replaced.
5. Temperature sensors are wrong in values. Old items are replaced with new ones.
6. Insufficient heating of hot water. The malfunction can be caused by incomplete opening or breakage of the three-way valve. To be sure of this, you need to wait until the system has completely cooled down. Then the valve is closed and the boiler is switched on to DHW mode. If the element is faulty, then the heating system will heat up.
7. During firing up, “pops” are heard. This situation arises for two reasons: there is insufficient pressure in the system, or the distance between the gas supply and the igniter has changed. The situation is solved by adjusting the size of the gap, the optimal value is from 4 to 5 mm. To perform this work, the boiler cover and the flap are removed, behind which the igniter is located. Next, the screw holding the electrode is removed and gently bent.
8. The temperature of the liquid in the circuit has dropped. This usually happens due to clogged filters. This means that they will need to be cleaned. Sometimes radiators or pipes that are damaged can be the cause. It is necessary to prevent freezing and clogging of the system.

These problems arise most often, but, as practice shows, you can cope with them on your own. Of course, this will require certain skills. Baksi boilers are fully automated and have a self-diagnosis system. Therefore, during operation, the display of the device may display the corresponding icons and error numbers, indicating a particular malfunction.

Range

For convenience, Baksi boilers are combined into lines under a common name, with common features. And within the line, devices may differ in power and other characteristics. Consider separately wall and floor options.

Wall mounted gas boilers Baxi

• Main;
• Eco Four;
• Baxi Four Tech;
• Eco Compact;
• Luna;
• Baxi Nuvola.

Wall mounted boiler Baksi

Main characteristics:

• Baxi main (means "Main, main"). Wall-hung gas double-circuit boiler, in which a bithermal heat exchanger is installed.
• Eco Four Are double-circuit boilers with two separate heat exchangers. Copper hydraulic tubes.
• Four Tech - modification developed on the basis of Eco Four. Due to the fact that the supply pipes are made of plastic (not copper), the cost of the devices is reduced.
• Baxi Eco Compact - a model similar to the Eco Four but more compact.
• Baxi luna - for the most part, double-circuit (except model 3 1.310Fi) boilers. Self-diagnosis system, underfloor heating mode, all protective functions, lcd display.
• Baxi Nuvola - a large-capacity boiler is built into the structure. They can be with atmospheric or turbine chamber. Copper heat exchanger.

Wall-mounted boilers

Single-circuit

Models with only one heating circuit:

• ECO-5 Compact 1.14F;
• ECO Four1.14 and also with F;
• LUNA 3 Comfort1.240;
• ECO Four1.24;
• Luna-3 Comfort 1.310Fi.

The average price for such models is 28 - 47 thousand rubles.

Single-circuit boilers

A popular model in its class: Baxi ECO Four1.14 (power 14 kW, chimney diameter 120 mm, overall dimensions 73 x 40 x 29.9 cm, with a circulation pump, air vent, expansion 8-liter tank, weight 25.5 kg, self-diagnostics, LCD display, copper heat exchanger, average price 28 thousand rubles).

Dual-circuit atmospheric

• ECOFour 24F;
• ECO-5 Compact 14F;
• ECO4S 18F;
• Main 5.14F and 5.24F.

Prices for atmospheric-type double circuits also range from 27 to 37 thousand rubles.

Popular model in the class: Baxi MAIN-5 14F Average price 27.5 - 28 thousand rubles.

Double-circuit turbocharged boilers

Boilers with a turbine combustion chamber and having two circuits can cost 77 - 103 thousand rubles.

These, for example, include models:

1. Moon Duo-Tec1.28;
2. Duo - Tec Compact Ht 1.24 Ga and others.

An example of a popular pet at an affordable price: Baxi Luna3 Comfort 240Fi. Technical parameters: Power 25 kW. Dimensions 76 x 45 x 34.5 cm.Weight 37 kg. Chimney diameter 60/100 mm. Copper heat exchanger. About 14 liters of hot water is produced per minute. Price 35 - 40 thousand rubles.

The central element of a gas boiler is the burner. You can make such a device yourself. For instructions on making a gas burner for a boiler with your own hands, see the article.

You can read consumer reviews about Conord gas boilers here.

Lemax gas boilers are quite popular. Affordable prices and a wide range of models are the main advantages of the devices. In this topic, in detail about the characteristics of the devices, as well as an overview of the models.

Condensing

1. Luna Platinum +;
2. Moon Duo- TecMpi +;
3. Duo-Tec Compact;
4. Nuvola Duo - Tec +.

The latest developments and technologies have been introduced into the condensing models. Each of them can be in one- and two-circuit design. The technology adapts to the conditions (pressure drop in the line, adaptive combustion control, etc.). They can also be converted to liquefied gas. Stainless steel heat exchangers. Electronic control, lcd display. The power of various models is 12 - 32 kW.

Baxi luna 3

Luna Duo - Tec Mp is the only type of boilers with increased power (they can only be in a single-circuit design), while the models are compact, which allows them to be placed on the wall. Devices can be from 33 to 110 kW. They can also be combined in a cascade of up to 16 boilers.

If you need a wall-mounted boiler of increased power, pay attention to Baksi Luna Duo - Tec Mp (single-circuit condensing).

Gas floor boilers Baxi

The choice of outdoor Baksi models is not as wide as the wall ones. The most demanded line is SLIM. The devices have a cast iron heat exchanger and can be rated from 22 to 107 kW. Case width 35 cm.

Condensing

1. Power Ht45-150 (stainless steel heat exchanger).
2. Power Ht230-650 (silumin heat exchanger).

Super-powerful boilers of a new generation (the numbers in the model name indicate the possible thermal power in kW). A cascade connection is provided to provide heat to large objects. The width of the units, however, is only 45 cm.

Atmospheric

• Slim 2.230 i;
• Slim 1.230 i and in;
• Slim 1.150 i;
• Slim 1.620 in.

In addition, the entire SlimHPS and Slim EF range is available with atmospheric burner.

The body is horizontally located (at a height of 1 m, width 1.14 - 1.24 m). Weight 266 - 380 kg.

SlimHPS has a sectional cast iron heat exchanger. Power 78 - 107 kW. A distinctive feature of this series is in gas automation with a thermocouple that prevents gas flow when the flame goes out. The thermocouple is a non-volatile element, so the boiler remains operational when the electricity is off, on the natural circulation of the liquid. Power 22 - 60 kW.

Review of popular models and their cost

Baxi produces a wide range of heating devices, so each customer can choose the optimal equipment for heating an apartment or house. Let's consider the most famous models and highlight their distinctive features.

Main

The boiler has 2 circuits and, despite its compactness, it has good power indicators. The heat exchanger of this unit is made of modern high-quality material - bimetal, due to which the service life is extended.

Specifications:

• power - 24 kW;
• Efficiency - 92.9%;
• expansion tank volume - 6 liters;
• combustion chamber - closed;
• DHW water temperature - from 35 to 55 ° C;
• maximum pressure 8 bar.

To control the boiler, there is a special digital panel on which you can set the desired heating temperature. It is intelligent equipment that automatically responds to changes in the environment and adapts the traction force.

At the moment, the Main 5 model is being produced, its predecessor was the Main Four, which was sold at a price of 18,638 rubles.

ECO Four

These are compact units with dimensions - 730 × 400 × 299 mm. Ekofor 24 - efficient units up to 24 kW. With their help, premises are heated, the area of ​​which reaches 240 m2. All information about the operation of the unit is displayed on the LCD display located on the front of the case.

Features on the example of ECO Four 24 f:

1. Continuous electronic modulation of fire.
2. Electronic ignition.
3. Stable operation even when the gas pressure drops to 5 mbar.
4. Operation on liquefied gas is allowed.
5. The primary copper heat exchanger is coated with a special corrosion protection compound.
6. It is possible to connect a storage boiler or solar collectors.
7. Defense mechanisms.

The product is in demand among users living in the private sector.

Options:

• power - 24 kW;
• Efficiency - 92.9%;
• tank capacity - 6 liters;
• performance for hot water supply at a temperature of + 25 ° C - up to 1.7 l / min;
• weight - 31.5 kg.

The price starts at 35,150 rubles.

Luna

These are condensing models with a built-in electronic control system. They work with a circulation pump, so they can be connected to auxiliary elements that facilitate operation. For example, using a timer, you can program the boiler for a week.

There is also a wide LSD display, on which all information about the work is displayed. When adjusting the heat output, the hot water consumption is taken into account, which makes the unit economical to use.

Specifications Luna-3 Comfort:

• power - 24 kW;
• Efficiency - 90.3%;
• tank volume - 8 l;
• maximum pressure - 3 bar;
• maximum temperature for heating - up to +85 ° C;
• weight - 31 kg.

Products from this series can operate on both natural and liquefied gas. Single-circuit boilers are intended for heating only. The cost of the equipment starts from 33,190 rubles.

Nuvola

This line is equipped with a 45 liter volumetric boiler. The heat exchanger is made of copper, and the device itself works with two circuits, which makes it universal.

Another advantage is the reliable automatic combustion control system. It takes into account how high-quality gas is used for work. In order to save energy, a modulating pump is included in the design.

Nuvola Platinum 33 GA specifications:

• power - 34 kW;
• Efficiency - 97.7%;
• tank volume - 7.5 l;
• weight - 64 kg;
• overall dimensions - 950 × 600 × 466 mm;
• performance for hot water supply at a water temperature of + 25 ° C - 18.9 l / min.

The cost of this model starts at 84,200 rubles.

Slim

Slim is the most common floor standing boiler produced by Baxi. In total, there are 5 modifications that differ in power characteristics, the range is from 22 to 110 kW. The design provides for the presence of a cast iron heat exchanger, atmospheric burner and an automatic safety system.

The control of this unit is very simple, all data on its operation are displayed on the LCD screen. Self-diagnostics of the system is able to identify problems and fix them on their own (not all).

The most powerful of this line is the Baxi Slim HPS model, which can be used to heat rooms up to 1000 m2. Insulation is installed under the casing of the devices, which is necessary to minimize heat losses.

As part of the series, the Slim EF model is produced, equipped with gas automation: if the flame in the burner goes out, the valve will automatically close. These are non-volatile installations connected to systems with natural circulation of the coolant.

Specifications Slim 1.400 iN:

• power - 40 kW;
• Efficiency - 90.1%;
• volume in the boiler - 17.4 l;
• weight - 150 kg;
• dimensions - 850 × 350 × 635 mm.

The cost starts at 90,000 rubles.

Power HT

These are condensing models, the power of which varies from 80 to 650 kW. Installed in boiler houses, public buildings and trade pavilions. The efficiency index of these boilers reaches 98%. If necessary, the units are connected in a cascade, up to 16 pieces, which will allow heating a huge area.

In Power HT units, the heat exchanger is made of silumin, which prolongs the service life of the equipment. The cost starts at 160,000 rubles. You can find out the cooking and heating ovens at the link.

Rating of heating boilers Baxi

We offer a rating of heating boilers from the Italian manufacturer Baxi.

Best Double-circuit floor standing boiler

BAXI SLIM 2.300 i 29.7 kW

The cost of the model starts from 100 thousand rubles. This is a floor-standing atmospheric type boiler (that is, with an open combustion chamber), the heat exchanger is made of cast iron. The boiler is designed for 50 liters, the hot water capacity is 12.1 liters per minute, which is quite enough. The boiler is equipped with an automatic electric ignition function and continuous electronic flame modulation. Safety is ensured by an electronic self-diagnosis system, a thermostat against water overheating and a draft sensor that controls the removal of combustion products.

Price: ₽ 100,000

BAXI SLIM 2.300 i 29.7 kW

Best Single-circuit floor standing boiler

BAXI SLIM 1.300 iN 29.7 kW

The average cost of the model is about 71 thousand rubles. This unit is from the same series as the previous boiler. This is a fairly compact floor-standing model designed for organizing heating. The boiler is equipped with a cast iron heat exchanger. The maximum level of useful heat output is 29.7 kW, the minimum is 14.9 kW. Equipment weight - 136 kg. There are two ranges for adjusting the temperature of the coolant in the heating circuits: from 30 to 85 degrees and from 30 to 45 (for underfloor heating systems).

Price: ₽ 71 097

BAXI SLIM 1.300 iN 29.7 kW

Best Double Circuit Condensing Wall Hung Boiler

BAXI Duo-tec Compact 24 20 kW

The price of the model is about 52 thousand rubles. This is a compact model with a high level of efficiency - 110%. Closed combustion chamber with forced removal of combustion products. The heat exchanger is made of stainless steel. Hot water supply is regulated from 35 to 60 degrees. The boiler is equipped with an adaptive flame control system and an energy efficient circulation pump. The pressure is monitored by an electronic pressure gauge. Safety is ensured by a built-in self-diagnosis system.

Price: ₽ 52,000

BAXI Duo-tec Compact 24 20 kW

Best Single Circuit Condensing Wall Hung Boiler

BAXI Duo-tec Compact 1.24 24 kW

The cost of the unit is from 47,000 rubles. The model belongs to the same collection as the previous one, but is intended only to ensure the operation of the heating system. The temperature is monitored with an updated display panel. Temperature sensors are installed both in the flow and in the return. The equipment is equipped with weather-dependent automation. The temperature in the heating system can be adjusted in the range from 25 to 30 degrees.

Price: ₽ 47 000

BAXI Duo-tec Compact 24 20 kW

Best Double Circuit Convection Wall Mounted Boiler

BAXI ECO Four 24 F 24 kW

The cost of the device is about 40 thousand rubles. It is a very compact model designed to be installed even in small spaces. The boiler is equipped with a closed combustion chamber with forced removal of combustion products. The heat exchanger is made of copper. The unit is equipped with a continuous electronic flame modulation system and smooth electric ignition. The air regulation system is patented.There is a possibility of reconfiguring the equipment for operation on liquefied fuel. The boiler is equipped with a weather-dependent automation, there is a digital temperature indicator on the control panel.

Price: ₽ 39 687

BAXI ECO Four 24 F 24 kW

Best Single Circuit Convection Wall Mounted Boiler

BAXI ECO-4s 1.24F 24 kW

The cost of the boiler is from 35 thousand rubles. The unit differs from the previous model in the number of circuits, it is intended only for organizing heating. The coolant temperature is regulated in two ranges: for batteries from 30 to 85 degrees and underfloor heating from 30 to 45 degrees. The set temperature is regulated and maintained in automatic mode.

Price: ₽ 35 580

BAXI ECO-4s 1.24F 24 kW