Which heater to choose - infrared, oil or convection, for the apartment?

Infrared heater: ceiling heater with thermostat, model overview, prices. With modern prices for utilities, I want to do my best to save money. However, heat is indispensable in winter, so heater manufacturers devote all their resources to developing economical ways to heat rooms. Among them - infrared ceiling heaters with a thermostat: the prices of these devices are more than justified by the durability and efficiency of work and energy savings.

Infrared heaters with a thermostat can significantly save energy

Electric heater myths

Electric heaters dry the air

The instructions for the heater often indicate the fact that the heater does not dry the air. It's true. There are no heaters as such, these are the same central heating batteries. They allegedly dried the air for the reason that during operation they did not absorb water from the air, but generated heat. The air still becomes drier, but there is an explanation for this.

Why is the air getting drier?

The condition of the skin and respiratory system is affected by air humidity. This is known to many. When the humidity drops below 40%, the skin dries up, at 60%, on the contrary, absorbs excess moisture, if the humidity is even higher, it becomes difficult for a person to breathe. Temperature also affects humidity. Let's do an experiment.

Pour boiling water into one glass and cold water into the other. A glass containing boiling water will give off steam. A simple experiment shows that as the temperature rises, increased vapor production is generated. If you cool the warm air with cold air, the "excess" water will settle in the form of drops. Rain, dew, fog are the same phenomenon. When humid hot air reaches the cold layer of the atmosphere, cooling occurs, excess water from the air falls to the ground in the form of rain.

To understand how much humidity should be in 1m3 of air, at different temperatures, I made a table. This moisture is called "Absolute moisture".

Table of the maximum water content depending on its temperature
Air temperature t,? С	?30	?20	?10	0	10	20	30	40	50	60	70	80	90	100
Amount of water, g / m3	0,29	0,81	2,1	4,8	9,4	17,3	30,4	51,1	83,0	130	198	293	423	598

Usually, the air is not completely saturated with water vapor. This is partially happening. The data in the table is a pivot point that will help determine the real humidity, it is also "Relative". It is about it that is reported in the weather forecast, its value is shown by special devices - psychrometers.

So what is Relative Humidity? This is the volume of water that is in the air at a certain temperature, compared to the maximum amount of water possible. The value is expressed as a percentage.

Let's say the air temperature is 10 ° C, the humidity is 50%. In this case, the amount of vapor in 1 m3 is 9.4 / 100 * 50 = 4.7 g. You turn on the heater, the temperature rises to 20 ° C. The amount of water in the air remained unchanged. As a result, the air humidity will be 27%. This air is dry and not comfortable for humans. Now, I think you understand why they say that the heater dries the air.

Infrared ceiling heaters with thermostat: device prices

Price comparison for infrared ceiling heaters from different manufacturers:

Manufacturer	Price level, rub.
Ecoline	2100-7500
Peony	2600-3800
Ballu	from 2500
Heat V	from 4000
PLAN	from 3000

Choosing a heater, you want to save money. However, try to think over the purchase in the long term, because it is worth taking into account not only the cost, but also the power, durability of the device. First of all, one should proceed from your goal.

For example, the purchase of an infrared film ceiling heater with a thermostat, the price of which is much lower than other types of infrared heating devices, will be justified if your task is to solve the momentary problem of heating a room (for example, in a rented apartment or in a country house). But, if you expect to use such a heater for decades, it is better to pay attention to models with longer service lives - they are more expensive, but they pay off with long and trouble-free operation.

Recording Infrared ceiling heaters with thermostat: prices, model overview first appeared Remoo.RU.

Infrared spiral heater burns oxygen

This statement is not true. If the spiral burned oxygen, it would itself have burned out from oxidation. In a couple of hours, only ash would be left from the spiral. People feel unwell for a different reason. The fact is that the heated air tends upward, thereby allowing the cold air to settle on the heating element.

Together with the air, dust particles from clothes and objects settle on it. These particles are burned and the food rushes upward with the warm air. That is why a person feels unwell. It is contraindicated to use such heaters in rooms where there are people with weak lungs. I do not recommend using them in rooms with a small area.

Infrared electric heaters

This type of heater was very popular. Their construction is quite simple. There is a nichrome spiral wound on a ceramic base or placed in a transparent tube made of quartz glass. A reflector of infrared rays is installed behind the spiral. To protect a person, there is a grill on the heater case.

The peculiarity of such a heater is that it heats not only the air, but also the objects located near it. It is advisable to use it in rooms with a large area where rapid heating is required. Since, using oil or converter heaters, it will take a sufficient amount of time to warm up. This will increase the cost of electricity. Such a heater is bad in that when the coil is heated, poisonous substances are released. However, if the room is large and there is a draft, this heater will work like no other.

Additional elements

Additionally, the following spare parts are installed on the devices:

Limit switches. As a rule, they are mounted on legs, they urgently turn off the device in case of falls or reaching an unstable dangerous position.
The air filter is needed for models with artificial airflow.
Automatic protection against short circuits and excessive heat. This spare part can be considered a necessity, but, oddly enough, it is often absent even on expensive elite devices.
The temperature sensor facilitates operation, when the preset microclimate in the room is reached, the device automatically turns off.

Thus, choosing a coil heater that is guaranteed to be safe and efficient is not easy. However, you shouldn't waste time on shopping trips and studying specialized information. Competent selection, the correct connection diagram - all this contributes to the fact that even in the most severe frost your house will be warm, cozy and comfortable!

offers customers a wide range of infrared heaters (IR heaters) wholesale and retail.

Infrared heaters are appliances that heat using infrared radiation, which is akin to sunlight.Such devices do not heat the air in the room, but the walls, floor and furnishings that are in their zone of action, and the air is indirectly warmed up from these objects, therefore, the efficiency of infrared heaters does not depend on the quality of the thermal insulation of the premises, on the presence of drafts, the height of the ceilings and the outside. temperature. You can read more about the design of infrared heaters, pros and cons, as well as health benefits here - "What is an infrared heater".

IR heaters are ideal for heating rooms with poor thermal insulation, with high and very high ceilings, for local and zone heating, as well as for heating semi-open and open areas. Electric infrared heaters are suitable for a private house, summer cottage, garage, greenhouses and greenhouses, for poultry houses (chicken coops), trade pavilions, open verandas and terraces, balconies and loggias, a large warehouse and workshop, for workshops, car washes, baths and saunas, for swimming pools and gyms, galleries and winter gardens with large glazing, etc.

A special category of infrared heaters is represented by street models - electric infrared heaters on a tripod and self-contained models on gas cylinders in the form of a pyramid. There are also infrared panels for the office, which are placed in the suspended ceiling of the "Armstrong" type.

The site contains wall, floor and ceiling infrared heaters from the best European and Asian manufacturers at an affordable price.

Convection electric heaters

These heaters have appeared a long time ago. They are a housing in which the heating element is located. The principle of operation is air convection. Warm air is lighter than cold air. A heating element or a nichrome spiral heats the air, and it rises up, the cold one goes down for further heating. These heaters are of the infrared type, only they do not have a screen that reflects infrared rays.

The heater located in the photo is commonly called the "Tram Stove". Most likely, the first heaters were intended for heating trams. A classic convection heater also burns dust, which has a detrimental effect on human health.

Convection heaters of a new design have recently entered the market. Instead of heating elements or nichrome filaments, a micathermal heating element is installed in them. This made it possible to reduce the heating temperature of the case to 60 ° C, thereby eliminating the combustion of dust and air elements. In addition, the overall dimensions have decreased.

Slight heating of the element was achieved by increasing its area. The element size is slightly smaller than the body itself.

As a result, less heat is generated per unit area of the heating element. The temperature at any point is around 60 ° C. These heaters have manual temperature control, which allows you to maintain the same temperature in the room. The housing is protected against falling, the heater is protected from overheating.

Thanks to this, it can be left unattended for a long time. They are great for heating a child's room. The housing will not allow touching the heating element or toppling over. It is advisable to use this heater for long-term heating of the room.

Design features: external modules

Outside there are the following elements:

Directly the body. You should not be guided exclusively by external data, although you should not forget about this. The design of the model is easy to evaluate from the photo. The heater should complement the existing interior of the room, look organic and natural in it. From a design point of view, the most important requirement is the presence of a protective grill on the body, which excludes direct access to the spiral. The mesh size should be about 5 millimeters. Plastics and metals are the materials for the manufacture of cases.Plastic must be non-flammable, but it is quite difficult to check this, some manufacturers deceive the buyer, use standard plastic, which deforms very quickly under the influence of high temperature. Thus, it is better to opt for a metal analogue, it does not need any additional checks.
Toggle switches and switches. If we talk about budget models, then they have mechanical type switches. Check how smoothly the knobs rotate, how easily the switches move, how clearly they respond to your actions. If during startup the device interferes with household appliances (TV or radio), you should not buy it, it is likely that after a month of use you will have to purchase a new one. Moreover, jamming indicates serious design problems that can provoke a fire.
Cable. The main parameter is the length, which should be sufficient for free connection to the outlet. Unfortunately, on many models, the length is limited, and therefore the connection diagram of a modern spiral heater is often not complete without the additional use of an extension cord. However, there is an opinion that a short cord is a sign of poor product quality, so it is better to choose models in which the cable is about 180 centimeters long.

Oil-fired electric heaters

Oil heaters can also be attributed to electric heaters. They have a sealed housing filled with engine oil. It serves as a heat carrier from the element, which heats up to the surface of the heater. In appearance, such heaters resemble a battery.

These heaters began to be produced to improve operational safety. The oil acts as an intermediary and transfers heat from the element being heated to the body. Thanks to the oil, the body temperature is reduced to a safe level. Such heaters should be used in a strictly upright position.

Fan heaters

The difference between fan heaters and convection heaters is that they have an electric motor with an impeller. The impeller blades blow on the heating element forcibly. Thus, removing heat from them and accelerating it around the room in the designated direction. Due to the intense airflow, the heating element does not overheat and the dust does not burn.

Thanks to the blowing, the small dimensions of the fan heaters have a power of about 3 kW. The air flow is directed in a certain direction, the room warms up quite quickly. A fan heater of this capacity allows heating about 30 m2. They are widely used in offices and shops.

Among the disadvantages can be noted the spread of dust and noise emitted during the operation of the electric motor. The dust is known to contain pollen, insect residues. Therefore, use in rooms where people prone to allergies are located is strictly prohibited.

Let's build the future today!

As the demands on energy efficiency and environmental friendliness of large household appliances increase, the pressure on heating element manufacturers related to the quality of their products increases. Future challenges with the new elements include the ability to withstand higher loads, temperatures and environments, with system design and materials science being key. Further development options may be at hand. It is enough just to study them in complex. By simulating real-world situations and conducting experiments in close collaboration with our material experts, we can develop truly revolutionary solutions for you.

Alloy type	Description
Fechral alloys Kanthal and Alkrothal *	Iron-chromium-aluminum alloys with high resistivity for temperatures up to 1400ºC.
Nikrothal chromium-nickel alloys	High resistivity chromium-nickel alloys for temperatures up to 1250 ° C.
Nifethal iron-nickel alloys	Nickel-iron alloys with low resistivity and high temperature coefficient of resistance for temperatures up to 600 ° C.
Cuprothal copper-nickel alloys	Medium and low resistivity copper-nickel alloys for temperatures up to 600 ° C.

* Kanthal Fechral alloys are offered as traditional high ohmic and powder metallurgy alloys (Kanthal APM).

Electric storage heaters

Storage heaters were invented about 25 years ago. It was then that two types of payment rates appeared: night and day. Such heaters are widely used in Western Europe.

Their principle of operation is the same as for convection ones. They generate a lot of heat. This is due to the fact that the heating elements are lined with magnesite or ceramic bricks with a high heat capacity. Outside, they are wrapped in thermal insulation material, which helps to retain heat. Electricity is cheaper at night.

The heater is on at this time. It accumulates heat energy, then turns off. During the day, the air in the room passes through the heated stones with a fan, thereby creating heat. These heaters range from 3 kW to 9 kW. The heater operation modes are controlled by a microprocessor, which is programmed in advance. This allows you to maintain the set temperature in the room, while consuming a minimum amount of electrical energy during the day. This heating method is best suited for rooms that do not have central heating or stove heating.

Quartz heater device: 4 basics of choice

An innovative device consists of two fundamental elements:

Monolithic slab. The composition includes quartz sand (for different manufacturers, its share in the initial solution is different). Usually painted on the front side or has an embossed pattern. Or ceramics for more expensive models.
Heating element securely embedded inside the slab. A high-quality spiral made of nickel and chromium (more precisely, nichrome). Gone are the days when it was allowed to use open elements in heating. The spiral does not remain open to interact with the environment.
Fasteners. For standard placement on the wall - 3 support brackets - 2 on the bottom and 1 on the top.
Accessories. Smart home system, separate on / off switch, simple thermostat or adjustable to an automatic timer. In a word, that through which the heater is connected to the network. The user determines which of the accessories suits him best. An individual room heating mode can be set via these devices. For example, in 20 minutes. before coming home from work, the heater starts to increase the temperature from cool to acceptable. It will be much more pleasant to return to a warm apartment!

When heating large rooms or a country house as a whole, it is possible to connect 2,3,4 devices into a single system. They are connected in parallel to each other.

Advantages and disadvantages of electric heaters

The considered heaters have both advantages and disadvantages. For your convenience, I have created a special table, which reflects all the information about the considered heaters. Now you can choose a heater for each room in your apartment or house.

Table for choosing the type of electric heater
Heater type	Dignity	disadvantages	Application area
Convection classic	Low price	High fire hazard, when heating small rooms due to the combustion of dust, it negatively affects human health	In large or ventilated areas
Infrared	Low price, efficient use of electricity, since you can direct heat radiation in the right direction	High fire hazard, when heating small rooms due to the combustion of dust, it negatively affects human health	In large or ventilated areas
Oil	High operational safety, the ability to control the operating mode, round-the-clock operation, beautiful appearance	Large dimensions	Well suited for heating small spaces
Convection micathermic	Full operational safety, the ability to control the operating mode, round-the-clock operation, small dimensions and weight, beautiful appearance	Price	Well suited for heating small spaces, including children's rooms
Fan heater	High power, small dimensions	Acoustic noise, dust spread	If it is necessary to quickly warm up the air of a larger room, create an air curtain at the entrance to the room
Accumulative type	Full operational safety, the ability to control the operating mode, round-the-clock work	Dimensions and weight, price	Economically highly efficient for space heating at two tariff electricity costs

Having looked at the table, you can understand that it is better to stop the choice on a convection micothermal and fan heaters.

Views

Product variations arise:

Due to the different design of the front surface of the slab. It can have various colors, embossing, frames, patterns. The manufacturer's imagination, the buyer's desire, the most suitable model for interior decoration are the main motives for such a change.
With a different amount of quartz sand in the final product, its quality. Unscrupulous manufacturers use dubious mixtures for heaters, prone to cracking, spilling. The product is fragile, possible chips and defects are easily "shoved" for improper handling. Be careful not to stumble upon such an appeal!
The most innovative representative of the species is ThermoQuartz (undermore timidly here). They are based on a heating element made of carbon filament, which significantly surpasses conventional quartz heaters in terms of reliability and heat transfer.
When infrared or non-infrared models (monolithic) appear. Infrared protects the main element - the heating coil - with sealed glass cylinders. Air is evacuated from the latter, they are hermetically sealed and very fragile. The second type of heaters - monolithic - has a 5% lower efficiency, but is safe. In the USSR, there were models with an open spiral, but they have sunk into oblivion with the advent of new times and the tightening of fire safety requirements due to numerous fires.

Application area

An innovative device will come in handy in a city apartment, in the country. He was especially fond of the owners of country houses. I bought it - and you don't need to fiddle with firewood, kindling a stove or spend money on a bulky electric boiler, if the room is modest enough in size.

Adherents of modern style in interior decoration also express very positive reviews about this device. The models fit perfectly into systems such as "smart home", and with a standard electrical panel and wiring, you can adjust the operation of thermostats so that each room maintains its own microclimate. After all, the inhabitants of an apartment or house can tolerate heat and cold in different ways.

Rules for choosing a solid quartz heater

The product hit the Russian market recently, and not everyone has learned to distinguish a quality product from a waste one. What indicators need to be considered when buying:

Structure.How much quartz sand is in the slab, are there any other additives (marble chips, river sand) and which ones. The most "ideologically consistent" products for this indicator are Teplofit plates. They are produced in the Republic of Belarus, but are quite affordable for purchase in any region of Russia. And they - DO NOT CRACK! They contain 100% quartz sand, the manufacturer was not tempted by the opportunity to save money at the expense of the convenience and nerves of the client.
Condition and uniform heating of the spiral. The characteristics and quality of heating can be verified by testing heater for apartment at the time of buying.
High-quality mounting brackets, the length of the cable attached to the heating element, etc. Details are always given by unreliable manufacturers. If the wire came off, and the brackets were not in the set, then these are not just minor trifles. This state of affairs may indicate a general bad faith of the company. This also includes the quality factor of the packaging. Reputable companies that care about their reputation strive to present compact packaged goods with customer care.

The equipment is versatile. It is used as additional heating, the main element of the heating system of the entire apartment. If heating is required in the car, a special support will be enough.

A bit of history

The principle of keeping heat in stone is not a new idea. Since ancient times, Australopithecines heated stones in a fire, due to which the heat in the cave remained for a long time. In besieged Leningrad, emaciated people, standing in line for food ration cards, were heated by bricks heated on a stove.

All ingenious is simple. Finally, we learned to use what we knew from antiquity - the stone keeps warm! Technology simply and very effectively borrowed the experience of previous generations. Made for the benefit of society. A plate of natural materials has a unique property of accumulating thermal energy, gradually cooling down.

Advantages and disadvantages

The advantages of the device rightly include:

Low cost. The price of one stove with a heating element cannot be compared with a traditional radiator, stove, etc.
Profitability. Nowhere else is there a device that can consume power like two standard incandescent bulbs and heat an entire room at the same time. Savings on heating, if purchased, sometimes reach 50%. Energy efficiency is colossal.
Aesthetic appeal. If the client wishes, the product can be completely disguised under the surface of the wall. When buying, it is easy to choose a variety of colors that match the overall design of an apartment, a separate room.
Ecological cleanliness. Quartz sand is a natural, natural element that fits into the concept of caring for the environment.
Duration of work. It is arranged in such a way that the stove cools down for long hours, heating up in just 20 minutes. In the conditions of a total shortage of time and the need for high-quality heating, a quartz heater becomes a real salvation!
Low level of fire hazard. The maximum heating level physically cannot exceed 100 degrees. This means that the risk of fire is minimal. However, when installed in the lower part of the premises, there is a possibility of unpleasant sensations for children and pets.
Lack of various kinds of negative radiation during work. It has been clinically proven that this type of heating device does not have any significant effect on the health of the inhabitants of the apartment.
The ability to maintain normal air humidity. The reliable outer shell in the form of quartz prevents the "dry air" effect that Soviet-born buyers who grew up on unprotected heaters will surely remember.
Reliability and an impressive warranty period. There is nothing special to break in the design, oxidation and rusting are also unacceptable due to design features.Therefore, a conscientious manufacturer does not exchange for months of a guarantee, but measures the time period in years, and the estimated total time of use - in decades.

The main disadvantage felt during use is fragility and significant weight. One slab weighs 10-15 kg. But it does not need to be carried anywhere, it is once and for all fixed in the right place. And one more thing: it is not intended for regions of the Far North with temperatures after –30 ° C. It is a heating aid.

Difference from ten-heaters

The efficiency of infrared models is 5% higher, but their use will bring noise effects. Buzzing, clicking. Small, but somewhat annoying sounds can be of fundamental importance for sensitive natures.

In addition, models with heating elements have many structurally justified elements: a foil layer, various insulators, an intricate body. Any technician knows the truth: the more parts, the more likely it is to break. They cannot be used on a balcony, in places with high humidity, etc. But monolithic ones can. So, all things being equal, savvy shoppers tend to lean towards the more practical option.

Installation

Wondering how to choose a quartz heater, you need to immediately think about fixing the device and placing it in the living space. If desired, it will be possible to paint in the desired color. The paint must be necessarily with heat-resistant additives: not all coatings can withstand a constant temperature of 75 or 95 degrees. Some can release harmful substances, others will simply peel off. In any case, with the wrong choice of coverage, adventure is guaranteed.

Upper and lower brackets are supplied with the heater for wall mounting (sometimes the package includes 3 items of the product name, sometimes - 4). During installation, they are screwed into the wall surface, and then the product is suspended. Possibility of sequential installation of several, with separate regulators. Connection to the mains is possible through the electrical panel, as part of a bundle or directly through the nearest outlet. If we are talking about a system of devices powered by one cable, then it is better to start separately.

Screen

Shielding heating and heating devices can significantly reduce heat loss. It is necessary to stop heating the walls and the environment once and for all. A layer of heat-reflecting material of at least 10 mm is the best solution.

ATTENTION! The quartz panel spreads heat in both directions. Using a heat-reflecting screen will make the heater work up to 20% more efficient! This important point must be taken into account in advance in how to choose a quartz heater in terms of completeness and functionality.

Foil + izolon, porilex with foil or foam foil popular in the construction market, rolled polystyrene can serve as a heat-reflecting screen. The main thing is that the thermal conductivity of the screen material does not exceed 0.05 W per m per degree.

For greater effect, sometimes a grating is placed under the layer of the heat reflector, and only after that it is securely glued to the wall. The technique allows you to form a layer of air under the material, which additionally retains heat. There is no need to reinvent a bicycle - there are good-quality ones on the market that can offer ready-made solutions for completely shielding heating systems.

Installation calculations

If you plan to fully heat the whole house using quartz heaters, then the calculation should be made based on the height of the canvas and the number of square meters. With a standard height (up to 3 meters) for every 7 sq. m must be placed one at a time.

If the apartment or room is less than 20 sq. m, then 2 devices will be enough.For a minimum space of up to 16 sq. m of the total volume will be enough and one. An important task is location. The most effective heat distribution and savings on thermostats occurs when heaters are installed in parallel, panels to each other. Accessories such as a daily timer and a thermostat can be connected to two devices at once or to each separately.

How to choose a quartz heater and what warranty periods to prefer

A guarantee is a very conditional thing. It can only be a competent marketing strategy that gives an advantage in the sales market for quartz heaters. If the choice is between an unknown company and a dealer working directly with a large supplier, then the second option should be preferred. Even if he exposes the terms of operation less than the first one.

Manufacturers who value their reputation often use specific figures and statistics to determine whether their company is able to service the incoming volume of requests for repairs within the warranty period. One-day companies, on the other hand, can install it by eye, not expecting to be on the market after the moment the batch is sold. In a word, the famous saying about a titmouse in hands and a crane in the sky works here, do not forget about it when thinking about how to choose a quartz heater of a suitable model.

An important point: before buying, you should hold the item in your hands. If sand spills out of the working plate, it crumbles right under the hands or traces have formed on it after being lifted - then not many will dare to buy such products. Proven market giants such as ThermoQuartz, Teplolit, Supra, etc. never allow themselves such liberties, therefore they maintain their positions in the market, expanding it to other countries.

Also, based on how to choose a quartz heater, one must not forget about its operating conditions. For example, in rooms where there is high humidity (summer cottage in the off-season), priority should be given to carbon-quartz grades with full body tightness.

Safety engineering

During installation and use, it is worth following a number of simple rules.

Firstly, it is not necessary to carry out the installation at extremely low temperatures. Also, during installation, it is worth observing the distance specified by the length of the brackets to the wall.

Secondly, the heater is designed for indoor use. These can be garages, swimming pools, warehouses (as a local heating means), bathrooms, office centers, country houses. Open spaces, precipitation, wind are unacceptable and lead to a decrease in the safety of use at times.

Thirdly, you must not expose a quartz heater to overloads associated with physical impact. It is for this, and also because of the increased safety, that they are mounted high in houses where there are small children.

If you follow the precautions, heating devices will probably last more than one heating season. Due to the limited heating, they are safe for screwing to drywall or OSB. Based on how to choose a quartz heater, taking into account that you have a clapboard on the wall, a bar - an arbitrary wall material will not heat up enough for that, and for their greater safety, manufacturers complete the heater with a reflective screen on the wall.

Care

In order for the device to work for a long time and reliably, it will take very little time and effort for the care procedures. It will be enough, as dust accumulates, to erase the "cultural layer" with a damp cloth. This is necessary to ensure the normal heating functions of the quartz heater and related products. At the same time, it is advisable to disconnect the device from the mains and wait until it dries completely before turning it back on.

Finally

In the market for quartz heaters, it is not so easy to find a manufacturer with an excellent reputation and affordable prices.How to choose a quartz heater and not be mistaken with the choice !? ThermoKvarts is the leader in terms of the lion's share of characteristics. The products are always of good quality and meet the stated requirements. The supplier was not noticed in saving on material - the dashboard contains only quartz sand and nothing more. Due to this factor, the service life is significantly increased, the products do not crack, they economically consume electricity, reliably protecting the owners from the cold.

The zealous owner will never miss the opportunity to prepare for the off-season heating shutdown in the apartment or equip his possessions with a real achievement of modern technology - a quartz heater. Affordable and economical, it will surely become an invisible companion of a comfortable life.

If you have not yet decided how to choose a quartz heater, call us, our experts are ready to provide advice regarding the purchase both by phone - 8495-055-93-21, and through the website chat or contact form. We are located at Moscow, Vysokovoltny proezd, 13A. Come and see for yourself the quality of the goods! We carry out delivery to the regions by a convenient transport company. The only dealer in Moscow and Russia! Call, write, we are always open for fruitful cooperation!