Decorative grilles for heating radiators: types, price overview and do-it-yourself installation

Recessed ventilation grill - application

Recessed grille made of perforated metal - used for installation in the opening. Grilles of this type are widely used in ventilation, heating and other areas - as a decorative element, while most often, the main purpose of such a product is the ability to pass air. For example, in ventilation, a decorative perforated metal grille will make the ventilation hole invisible, while not disrupting air exchange, due to excellent air permeability. Also, for proper air exchange in the room, it is necessary to use decorative grilles for installation in interior doors. A convection or ventilation grill for window sills is a solution for those who are faced with an unpleasant problem when windows sweat in winter. It fits perfectly into any interior - a decorative screen is when it comes to closing a radiator or heating batteries that are recessed into a niche. Although, if you need access to the heating devices, look at this page - the inspection screen. And, in the case when engineering devices protrude from a niche or not into a level with a wall, our production offers - a convex screen.

How to choose

The main criteria for choosing a ventilation grill for a window sill are the following parameters:

• Length of the product. The length of the grate should correspond to the length of the battery installed under the window sill. It can be a single structure consisting of several separate elements.
• Section of the product. The width or cross-section of the ventilation grill must ensure sufficient air circulation so that condensation does not form on the surface of the window sill.
• The presence and quantity of connecting elements. This parameter determines the possibility of foreign objects falling into the internal space behind the window sill. This is especially important if the front side of the heating radiator is protected by a cladding material.
• Style, color and design determine the location of a specific product.
• The cost depends on all of the above parameters.

One of the unconventional ways to design ventilation holes on a window sill

Related article:

Screen for the heating battery. What is it for, what materials it is made of; tips on choosing, on assembling the box and increasing the efficiency of hidden batteries, an overview of prices for popular screen models - read the publication.

Ventilation grilles - our advantages over analogues

Decorative grilles of our production have a huge number of positive differences from analogs offered on the market. Metal gratings are made according to the customer's dimensions, taking into account other design features of his order: the size of the frame, the edges of the product and the exact presence or absence of holes in the frame for fixing the grating. The absence of holes in the small-sized grilles allows installation with mounting glue, and if there are holes, installation is carried out using self-tapping screws painted in the color of the product. Metal gratings - do not dry out over time, which cannot be said about MDF / HDF / wooden gratings. The paint does not fade under the influence of ultraviolet light, such as, for example, pvc / plastic gratings turn yellow with age. For the production of our products, cold-rolled steel is used, which is much cheaper than the cost of non-ferrous metals such as aluminum, bronze, stainless steel.The individuality of products is facilitated by the choice of several types of perforation, as well as a variety of colors - including "antique".

At what price can you buy ventilation grills for a window sill - price overview

Ventilation grilles for window sills can be bought in building materials stores and retail chains that work with similar products, as well as specializing in sanitary equipment. In addition, such products are offered by online stores of different directions, both working with building materials, and with plastic products and elements of decorative finishing of premises.

In companies engaged in the production of interior decoration elements, you can order ventilation grilles according to individual sketches.

The following table shows the cost for individual models of ventilation grilles as of the II quarter of 2020:

The presence of a large number of models made of various materials and in a wide range of overall dimensions allows you to choose the required product for a specific location, and the ease of installation allows you to install it yourself.

Plasterboard box with grilles for radiators

Color spectrum

It is worth noting that each monitor has its own color reproduction settings, so colors may vary significantly from those shown below:

• ral 1001
• ral 1011
• ral 1013
• ral 1015
• ral 1016
• ral 1019
• ral 2008
• ral 3003
• ral 3015
• ral 5000
• ral 5012
• ral 5024
• ral 6002
• ral 6019
• ral 7004
• ral 7040
• ral 7042
• ral 7044
• ral 8007
• ral 8017
• ral 8028
• ral 9001
• ral 9006
• ral 9016

Decorative grilles are painted with powder paint at a temperature of 200 ° C in any color at the customer's choice. Powder paints used in production are absolutely not afraid of exposure to ultraviolet light, that is, they do not fade. For the best painting quality of decorative items, the gratings are pre-treated with special means.

How much is a decorative grille for its size?

Price is one of the important criteria taken into account when planning the closure of ventilation and other openings. offers to calculate the cost of the grill using the online calculator, which is located on the left at the top of our website on this page. The calculator is quite simple in calculations and at the same time it is expanded with the characteristics necessary for your lattice. This gives a real idea of ​​the cost of a decorative grille without additional surcharges - it calculates the price of a grille without shipping, but with VAT.

What are the production times for custom-made metal grilles?

The production time for decorative metal products depends on the volume of the order and the workload of production - in practice, it is 2-3 days.

What are the terms of delivery?

Due to the fact that each order is individual, our company works on a prepaid basis.

How long have you been in the market?

has been supplying decorative metal products to all corners of the Russian Federation since 2013. The commercial activity of the company is confirmed by the constituent documents.

How are products delivered to the regions?

We send finished products made of perforated steel by a transport company (TC). Transportation is paid upon receipt of the goods in the shopping mall. Delivery to the shopping center - FREE OF CHARGE.

Where to buy decorative grilles in Moscow?

You can buy decorative grilles and screens for heating batteries in Moscow in our store at the Kashirsky Dvor 3 K10-22A construction market by making a preliminary order. Samples of metal products are available.

Source: ventokey.ru

Decorative screens for radiators: photo

Decorative grilles are surface-mounted or built-in elements made of various materials that cover radiators and give the heating system an attractive appearance. By manufacturing method screens are divided into groups:

• Designer... They are made according to the individual design of the premises.
• Standard... Produced in bulk according to standard sketches.
• Homemade... Made by hand from scrap materials.

Photo 1. The designer openwork screen covers the heating radiator and fits perfectly into the interior.

Designer made from expensive wood, tempered glass or metal. Product price can start from 20,000 and more than 100,000 rubles... The buyer pays for the opportunity to own an exclusive high quality item.

Standard the grilles have an equally attractive appearance. They are selected individually for the design of the room and fit perfectly into the interior. Price per product belowand the quality depends on the manufacturer.

Photo 2. Standard plastic grilles look very simple, but they do their job perfectly.

Homemade gratings are made at home in order to save money. With the ingenuity and experience of the master, the product turns out no worse than design, but at a low cost... However, homemade grates are not always cheaper than store ones. The price of materials is growing all the time, and the necessary tools are not always available.

Photo 3. Unusual home-made decorative screen for the battery, made specifically for a specific interior.

Quality radiator grilles have their advantages:

• Add to the design of the room finished appearance.
• Do not interfere with heat transfer in room.
• Withstand high temperatures.
• Safe for people and animals.

Important! In the manufacture of decorative radiator grilles should be used only environmentally friendly adhesives and paint coatings. Some types of glue and paints, when heated, begin to release phenol and formaldehyde... These substances are toxic to the human body, they cause genetic pathologies and cancer.

Buy products only from well-known manufacturerswho value their reputation in the market. Modern and beautiful radiator screens can be purchased in any specialty store... Before buying, ask the seller to show the quality certificate for the product.

Ventilation grilles for batteries on plastic window sills

After installing plastic windows, there is almost always a problem with the formation of condensation. To solve it, it is necessary to use ventilation grilles for window sills. This is a simple and convenient option designed to evenly distribute the warm air coming from the radiator in the room.

After installing windows, they are almost always equipped with window sills. To bring even more comfort and convenience, ventilation grilles for window sills were invented. These devices are responsible for the circulation of heated air, which supplies heating radiators to the window area.

A big problem is ventilation in the plastic window sill. Once installed, it is difficult to achieve natural air circulation. Usually, the heat coming from the batteries rises up and then, cooling down, goes down the room. Convection grilles in the windowsill perform the function of natural ventilation. With them, warm air will rise to the windows through the windowsill, which is much better.

The installation of gratings will allow the window sills to do their work with a fuller dedication. Due to their heat-shielding properties, they will retain the streams of warm air emanating from heating devices and create a warm air cushion in the window area. Condensation will then not form.

Experts recommend that you equip gratings without fail if wide window sills are installed in the room. Their dimensions completely overlap the heating radiators under the windows.After that, hot air does not enter the room correctly and is distributed there. For this reason, condensation forms, and the room does not warm up well. A small decorative item will solve two problems at once, without violating the design concept.

How to make a decorative screen with your own hands

You can create a protective grille that will be attached to both the radiator and the wall with your own hands. To do this, you need to choose a material that will match the color of wallpaper and curtains and meet thermal and environmental requirements. Also, the independent production of a decorative screen greatly facilitates the choice of a variety of mounting assemblies.

If metal is selected as the material, it is necessary to prepare:

• galvanized steel sheet;
• corners 15 x 15 mm;
• inverter welding machine suitable for working with thin-walled metal.

It's quite difficult to make such a screen on your own, so it's worth buying factory-made elements and then assembling them.

Stages of work:

1. The choice of the dimensions of the lattice with a margin of 10-15 mm in width and height.
2. Drawing up a drawing taking into account the technological holes that provide free access to the radiator elements.
3. Corner making.
4. Frame formation.
5. Installation of the lattice in the frame.
6. Installation of support nodes in contact with the battery surface.
7. Application of a protective layer.
8. Painting the finished product with special heat-resistant enamel or paint.
9. Optionally, drawing.
10. Testing the resistance of the screen to high temperatures by maximizing the heating of the coolant.

Hardwoods are best for making a wooden screen.

The work is done in several stages:

1. Making measurements.
2. Sketch development.
3. Pre-drying the workpiece to reduce moisture to 12-15%.
4. Treatment with an antibacterial agent to prevent the growth of microorganisms in the wood fibers and the formation of mold.
5. Sawing out structural elements.
6. Assembly.
7. Coating with water-based paint and varnish to reduce the effects of temperature changes on wood.

The wooden grill is made under certain external conditions: temperature +18 +25 ° С, normal humidity, supply ventilation.

Lattice purpose

The convection grill in the sill board prevents condensation (which, in turn, leads to the formation of fungus). This happens due to a violation of the circulation of air in the room and due to an increase in the level of humidity.

The installed grill relieves a person from this problem: the air heated by the battery freely flows up through it to the window, and when cooled at the opening, it goes down.

The location of the convection grill in the window sill

Now let's take a closer look at why it is important to install the grill, and from what condensation occurs on the windows.

According to SNiP, central heating batteries should be located under the windowsill. Their task is not only to warm up the room, but also to heat the window opening - in order to avoid condensation. Therefore, the radiator always protrudes slightly relative to the window sill so that warm air from it can rise up to the window.

However, now the methods that were relevant earlier are often violated:

During the repair, window boards of greater depth are installed, completely covering the radiator.

Sealed plastic windows are installed.

Old wooden frames, which were installed in houses under construction in the second half of the last century, had gaps and slots. Through them, air freely entered the rooms, and was removed through the ventilation shafts - that is, there was its natural circulation.

Several ventilation grilles in the window sill above the radiator

Until the "noughties" (when people began to massively replace old cracked wooden windows with new PVC structures), there were no such problems with condensation. Yes, and the rooms were not so stuffy - again, because of the influx of fresh air through the cracks.

Now people often forget that they need to worry not only about the beauty and tightness of the window, but also about normal ventilation. There are two ways to solve the problem:

Install the supply ventilation valve in the window.

Install the ventilation grill in the window sill.

Ideally, these methods should be combined: if there is a grill in the window sill, this will not solve the problem with stuffiness in the room.

Types and characteristics of products

Regardless of which window sill the grill is selected for (plastic, wood, stone) - it can be made of the following materials:

The appearance of the ventilation grill for the window sill

The shape of the lattices is rectangular (like the window sill). The most common frame sizes (in millimeters) are:

The products can be divided into 2 categories according to the control method:

Non-adjustable - having fixed lamellas.

Adjustable - with slats that can be tilted, thereby allowing more or less air to pass through and directing it.

The appearance of ventilation grilles of different models

You can also divide products according to their location relative to the window sill:

Flush with the surface.

Protrude against the surface.

As for the shape of the holes - most often they are made in the form of slits. Much less common are subwindow lattices with round cuts, or any other shape, up to some kind of decorative figured, with ornaments or patterns.

How and what to choose?

The main rule when choosing a ventilation grill for a window sill is to be guided by its length and the length of the battery.

The best option is to choose a grille that is about the same length as the radiator. It can be either 1 long lattice or several shorter items. An insufficiently long product located on one side of the board simply will not save you from condensation in the other part of the window.

With this rule, one more thing should be observed: pay attention to the free cross-section of the lattice (for reference: this is the area of ​​the holes through which air can pass). For most convection models, this characteristic ranges from 0.42 to 0.6 - which will be quite enough to solve problems with condensation on the windows.

Varieties of gratings by material of manufacture

Today you can buy decorative grilles for heating radiators of different types. According to the material of manufacture, they are divided into wood, plastic, glass, metal, from MDF (medium density fiberboard).

Regardless of the material of manufacture, protective screens must withstand high temperatures without changing their shape and original appearance and, when heated, not emit unpleasant odors, and even more so, harmful substances.

Wood

The wood looks great and is suitable for almost any interior. Well-finished and tinted wood gratings are in high demand despite their relatively high price. They are made from hardwoods, which do not emit resin when heated. These species include beech, oak, ash.

It is not recommended to install wooden screens on radiators operating on a convector type. The design of such heating devices involves covering almost the entire upper surface with a grill. The small holes located on it will not be enough for maximum heat dissipation.

Rattan gratings, which are stretched over a wooden frame, look very nice. These materials have good thermal conductivity and are environmentally friendly.

It is not recommended to buy wooden panels for home-made heating devices, since non-observance of the technology can lead to a premature loss of the appearance of the product.

MDF

Models of decorative lattices made of MDF should be approached with great care. These materials contain adhesives that, when exposed to high temperature heating, can cause surface deformation and delamination of the product. They can be installed solely for decorative purposes, if you do not plan to heat the room too much.

At the same time, MDF lends itself well to processing. Various patterns can be cut on the panel, which will decorate the room and provide free flow of heat. To improve the performance of the radiator, it is better to choose MDF screens with large enough holes.

Advantages of MDF gratings:

• low cost;
• the ability to withstand significant mechanical stress;
• good thermal conductivity;
• easy assembly and disassembly.

Panels made of this material can imitate oak, beech, maple, walnut, cherry, mahogany, wenge, metal and other textures. Also MDF can be painted in any color.

Glass

Some people are wary of installing screen protectors on glass batteries because the material is very fragile. But for the manufacture of such products, high-strength tempered glass with a thickness of 6-8 mm is used. It is very difficult to break it even with a strong desire.

Advantages of glass panels:

• relatively low cost;
• ease of installation;
• high decorative characteristics (different degrees of transparency, various shades, the ability to apply drawings or photographs by thermal printing);
• security;
• ease of care;
• good heat resistance.

Glass screens are fixed to the wall with uprights and completely cover the battery. Below and above, there is space for free circulation of convection currents. Heating the room by means of directed thermal radiation in this case is significantly limited.

Metal

Metal is the most common material for decorative radiator grilles. Such a product is a perforated sheet panel with various hole patterns. The metal screen looks neat, elegant and provides good heat dissipation.

The most commonly used frame construction. The metal can be black or galvanized. Also common are stainless steel panels that are manufactured in the factory. The thickness of the steel sheet should be 0.8-1.0 mm.

The body of the metal screen is usually painted using the baking technology (powder technology). This layer does not change color when exposed to high temperatures. Often, various patterns are applied to metal surfaces.

Metal grilles for heating devices, except for apartments, are installed in public buildings: schools, children's hospitals, gyms.

Prices for screens for heating radiators

screens for heating radiators

Some types of plastic

Plastic, along with the above materials, can be used for the manufacture of radiator grilles, but only some of its types, in particular, based on PVC (polyvinyl chloride).

If the manufacturing technology is observed, the PVC screen can withstand an increase in temperature up to +95 ° C. It begins to smolder or burn at a temperature not lower than +220 ° C. But since the thermal conductivity of plastic is less than that of wood or metal, more energy will be spent on heating the room.

When choosing plastic gratings, you should pay attention to the following parameters:

• dyeing the material in bulk, without laminating film;
• incombustibility;
• sufficient strength.

Plastic screens are not suitable for gyms and children's rooms.But at the same time, they have a number of advantages: aesthetic appearance, variety of shapes and colors, low cost.

There are also combination screens made of two or more types of materials, such as metal with PVC, rattan or wood with MDF.

Stages and rules of installation

Do-it-yourself installation of the ventilation grill can be done in a plastic or wooden window sill - much more experience and other tools are required for installation in a concrete "board". Otherwise, the lattice is mounted in a concrete window sill in the same way.

Consider the nuances and stages of work for a plastic or wooden board and the same lattice. For work it is not necessary to remove the window sill... The direction of the slats (if the holes are slotted and the slats are set at an angle) should be towards the window.

Cut-out hole in the window sill for the ventilation grill

Of the tools you will need:

Marking tool (marker, pencil).

Jigsaw or grinder.

Plastic adhesive (optional).

Any heavy object that can be used as a press (needed if the grate will stick).

The drill diameter of the drill must be larger than the width of the jigsaw blade (so that it can crawl through the drilled hole).

Stages of work (video)

Stages of work

The process itself looks like this:

The place where the lattice will be located is marked.

Holes are drilled in the corners.

A jigsaw blade is inserted into the hole and a landing hole is cut out under the grate itself.

The product is installed in the hole - for "trying on".

The edges of the hole are coated with glue.

The grille is put in place and pressed into place.

Glue extruded along the edges - removed.

Any heavy object is installed on top of the grill - as a press.

Opening in the window sill for installing the grille

Metal products (as well as some plastic and wood) are attached not with glue, but with bolts.

The use of glue is not an ideal solution - in this case, the structure will turn out to be one-piece. If necessary (for example, if the plastic lamella breaks), the grating will have to be torn off from the surface.

The glue can be skipped if the groove is perfectly even: so that the grill “sits” in it tightly, without shifting. In this case, if necessary, it can be pulled out - for replacement, repair or cleaning.

Source: ventihome.ru

Installation and use. Expert advice

Installing the grille on a radiator is a very simple operation. It will be especially easy if both of these elements have standard sizes. For a reliable and long-term service of the grille, you need to take care of it, avoid various damages. To choose the best option for your own home, you can evaluate photo catalogs. It is advisable to invite a designer who will develop the style of the interior and tell you what is best for the radiators.

Correctly chosen grille will provide you with an attractive interior in the house and will become its integral part. And regular maintenance will significantly extend its service life.

Grates in stock

Flat steel lattice in the window sill with painting

Stainless steel grates 2mm thick for the worktop

Slotted grates in the window sill

Stainless steel louvred grilles for worktops

Steel grilles with an overlay frame and edging, white for windowsills

Lattices made of aluminum 2mm for the worktop

You can familiarize yourself with the assortment in more detail and buy grates in the window sill and countertop in stock in the STORE section.

Worktop grates with flat front panel and flanged edge

The most common type of grates in window sills and countertops. Decorative grilles with flanges are a more complex welded structure. Flanging - the rear part of the grille (stiffening board), inserted into the mounting hole.The flanging gives the lattice rigidity and flatness. It also visually hides the cut of the window sill or countertop, which is visible in flat gratings through the holes in the ornament. The flanging also allows for concealed fastening of the grille. And among other things, a mesh-backing is attached to it, if necessary.

Slotted grates in the window sill

Narrow lattices with a slot-like opening 10-15mm wide. Basically, we make such gratings from stainless steel with a polished or polished surface. Hidden fasteners. It is possible to manufacture with several slots.

Recently, designers and architects are increasingly using Western ideas of combining countertops and windowsills, including not only in kitchens. Also, flat convectors built into the window sill are increasingly being used. For such cases, we have something to offer.

We make grilles for window sills and countertops made of stainless steel, brass, aluminum, structural steel with painting or decoration. The grilles can be of simple flat design, have a flat front panel and rear flange, as well as a front panel with an overlay frame and rear flange.

The grilles installed in the window sill and countertop do not have the same requirements for the free cross-section as for ordinary ventilation grilles, because a high-speed air flow should not pass through them. Convection grilles with relatively closed or small ornaments do an excellent job of simultaneously letting in warm air from the radiator, not allowing you to see what the grill is hiding, and of course being at the same time decorating your windowsills. Moreover, in this case, a small ornament is more recommended in order to prevent various objects from falling into the lattice.

But at the same time, decorative grilles installed in window sills or in a hole in the countertop experience a constant abrasion or scratching effect. They are often wiped clean, they are often splashed with various liquids, objects can be placed and moved on them. Of course, we take into account all these factors that are unfavorable for the decorative surface or coating. For such gratings, coatings and surfaces are offered that are resistant to the listed factors. Lattices made of natural brass and aluminum must be coated with a protective and decorative varnish to reduce staining and prevent the appearance of splashes and fingerprints.

We do not recommend making large window sills. As a rule, a length equal to the length of the radiator is sufficient. As for the width, it can be equal to the width of the radiator section or even slightly narrower. We recommend using wider grilles only in cases where the design of the decorative panel is too low for the convective air flow to pass. In any case, our experience shows that the grilles in window sills and countertops look more stylish and neat just at small sizes. It's almost like shoe size, if the comparison is relevant in this case.

Source: www.decogrille.ru

Types of structures

The determining factors when choosing a decorative panel are the dimensions of the radiator and its location in the wall opening. Most often, batteries are installed in a special niche under the windowsill. If it is necessary to mask this entire area, you need to choose the dimensions of the grille in accordance with the dimensions of the recess in the wall.

Factory designs usually have the following parameters:

• dimensions not exceeding the dimensions of the radiator by 15–20 mm;
• the distance between the surface of the battery and the installed protective panel is at least 20-25 mm (to create effective convection flows);
• a honeycomb surface of wood or metal screens to provide air flow to the radiator.

An important parameter is the minimum contact area of ​​the hinged screen with the heating device.This will help minimize heat loss and lower the surface temperature of the panel.

By design, battery screens are of the following types:

• hinged without sidewalls;
• hinged without top cover;
• hinged with a top panel;
• flat;
• mesh;
• boxes.

Hinged screens without sidewalls are mounted on the upper plane of the radiator and are used for appliances that are not closed from above by a window sill and are not mounted in a wall niche.

Hinged panels without a top cover are mounted on batteries installed in niches or under windowsills.

Hinged grilles with a top panel cover the heating device both from the facade and from above, they are relevant with a small protrusion of the battery from the plane of the wall.

Flat screens are installed on radiators fixed to the wall surface or in a wall niche.

Mesh panels have cells of different sizes and shapes.

The boxes completely hide the battery, as well as the pipes connected to it.

Ventilation grilles in the windowsill

Decorative grille for ventilation in the window sill is designed for convective air flow from the heater. Such a product does not require a large cross-sectional area of ​​the pattern. It is possible to use a base of perforated steel or fine brass mesh in yellow or black - it will hide the look of the radiator and help the accessory look like a beautiful decorative panel. Grilles for radiators in the windowsill are quite popular today. And we present to you our extensive catalog, although our possibilities are much wider: we can implement almost any of your ideas or offer our own non-standard idea.

Monolithic as a bar, a narrow lattice with two slots was needed for installation in a convection outlet.

The patterned grill with a warm golden surface has become a classic example of our workshop. Lat ..

The lattice is made according to the classic pattern of the lattice in the window sill that has already become in our workshop. Prod ..

To decorate the kitchen windows, the craftsmen created two lattices with an elegant Majestic ornament and added ..

Painted lattices with openwork floral patterns are made of ordinary steel and covered with a matte finish.

The patterned grill with a warm golden surface has become a classic example of our workshop. Lat ..

The flat lattice for the window sill is made of aluminum and decorated with varnish and paint similar to brass with a ...

The grates for the windowsill are made in our workshop from natural brass with a thickness of 2 mm. Construction ..

Long satin-brushed steel ventilation grill for kitchen countertops.

The sanded surface of the grill is silk to the touch and is pleasant to touch. Thanks to the applied ..

Flat brass grilles with minimalistic slotted patterns are designed for convection decoration.

The flat brass window sill grate with a warm matte sheen accentuated the light artificial look.

A batch of brushed aluminum grilles for hallway window sills with white walls and marble walls.

A narrow lattice with only two horizontal holes will laconically decorate the windowsill. Sanded by ..

In this design project, the masters were faced with the task of creating laconic lattices for the kitchen. Lattice you ..

How to buy a metal decorative ventilation grill for a windowsill in Moscow?

You either need to know the dimensions of the hole where the product is being selected (you can call the measurers from our company), or choose a suitable model of the lattice at the stage of manufacturing the window sills. We will recommend the best option for your case and budget and make a sketch that can be passed on to the window sill manufacturers.

All our convection grids for the windowsill are made strictly according to the client's dimensions.

If you have made a large order and want to control its execution, come to our production site - we do not interfere with this.You can visit the production several times, we have no secrets from our customers, on the contrary, we are proud of the opportunity to show the process of making small and dimensional masterpieces from metal.

Lattice types

There are several factors by which gratings are classified. As a rule, two of them are considered to be the main ones:

• installation method;
• material of manufacture.

Although sometimes there are also other divisions into types, for example, according to the characteristics of the protective surface coating, environmental friendliness and other differences. But these differences most often depend on two fundamental factors that should be considered separately.

Decorative screens (grilles) for heating radiators

Design issues are also a separate area, which has a lot of nuances. Classic options and examples of design solutions can be assessed from the photo after the final choice of the base material and design solution for the grilles.

The material of the grilles in the window sill for batteries

We have all. Do you need an aluminum ventilation grill for your windowsill or a brass product? Or maybe a piece made of stylish stainless steel or ordinary steel with decoration fits perfectly into your interior? You can buy grilles in the windowsill for radiators from almost any metal from us - the production is located in Moscow, but delivery is possible throughout the CIS.

The lattice design can be flat - glued or fixed with wooden strips. The second design option is when the product is made with flanges and hidden fasteners hidden inside the lattice. This option is convenient in cases where the grille must sometimes be removed and reinstalled.

Source: artcust.pro