Easy warm door with your own hands. How to insulate a door in a private house for a long time. Elimination of defects before starting work

How to call the master

1. The most convenient and easiest way to call our customer service: 8 (495) 641-96-97
2. Send us a photo of the lock, handles, larva, door via WhatsApp and our master will contact you within 5-10 minutes.

At a convenient time for you, the master will come to you with an assortment of locks and accessories necessary for your door.

Depending on the complexity of the work required, within 10 minutes - 2 hours, your order will be completed.

Craftsmen will upholster a new door or replace obsolete material.

Thanks to the wide variety of upholstery materials, you can choose a color that will perfectly match the interior. Craftsmen will be able not only to change the upholstery, but also to produce insulation, sound insulation with modern filler.

We leave, serve orders in Moscow and the Moscow region. Thanks to high qualifications, skills and knowledge, our craftsmen will make any upholstery of a metal door on an individual order.

The work performed will bring comfort, coziness, aesthetic pleasure and beauty to the house.

The rich gamut, varied texture of dermantine fits perfectly into the interior of the house.

Dermantin benefits:

1. Long service life
2. Resistance to temperature extremes, to low temperatures
3. Does not fade in the sun
4. Resistant to chemical substances
5. Ease of care: the ability to use detergents.

Dermantin upholstery is a practical and economical option. Replacing outdated material with durable vinyl leather, dermantine is cheaper than buying a new one.

The price depends on a number of components:

1. Frame type (metal, wooden)
2. Combining a pattern
3. Canvas dimensions
4. The quality of the upholstery used: category
5. Backing layer thickness.

You only need to choose the material, color and pattern. Finishing is done at home. For restoration it is not necessary to remove the door from the hinges.

We guarantee the efficiency and quality of the work performed.

Insulation with polyurethane foam

An equally effective way to protect a doorway from cold air is to use polyurethane foam:

Foam gun

1. Buy a foam gun, medium size.
2. Cover the border of the door with construction tape, including the door itself, the frame and the wall.
3. Fill the inner and outer perimeter of the door with polyurethane foam, making sure that there are no voids between the door frame and the wall.
4. Then, using sandpaper and a knife, remove excess foam.
5. At the end, the joints are putty and painted to match the color of the walls of the house.

Service prices

Departure outside the Moscow Ring Road - 7 km for free, then 20 rubles. for 1 km.

Official registration of the work performed. Up to 3 years warranty. Departure of the master is FREE.

* prices are for work. * free visit of the master - when placing an order.

Simple door for unheated rooms

Upon completion, you can start making the door from the boards. The prepared material must be cut into elements of the required length. The number of parts will depend on the width of the door and planks. Boards are laid in grooves or on the jamb surface until they are completely filled. If there is a shortage of whole boards, it is undesirable to make an insert from a narrower part. It is necessary to calculate and cut the details so that the door consists of elements of the same width. The laid boards can be pulled together with clamps or wedges. To connect the parts into a single structure, you need to cut out three connecting elements: two crossbars and a diagonal. Cross joints are located at the top and bottom of the canvas in a horizontal position, the diagonal between them is in any convenient direction. The shape of the mount is similar to the letter "Z". Then the whole structure is fastened with screws or nails. The attachment points should be located asymmetrically, preferably in the shape of a triangle or trapezoid. This will provide additional rigidity to the structure.

Making a door with your own hands is quite simple. It remains to fix the hinges, handles, if necessary, a lock or latch. Some of these operations can be performed by yourself after installing the product in place.

Service areas of Moscow:

Door for rooms with insulation

A do-it-yourself wooden door for a room with heating (for example, for a bath or a warm garage) can be made from boards 40-50 mm thick. The best option is a floorboard with tongue and groove.

Manufacturing begins with a doorway. The sequence is the same as in the previous version. The beam for the opening must be at least 75 mm thick or correspond to the thickness of the walls of the room. It is advisable to make the front door in a recessed version.

For the door, it is necessary to cut the blanks of the required length and fill the doorway with them. The width of the opening must be calculated in advance so that the filling occurs in the most complete segments. Width adjustments can only be made with the outer boards.

The workpieces must be aligned, compressed and fixed in the doorway. To connect the structure, you need to make two dowels. The dowels are pieces of wood, the length of which is the same as the width of the door. In cross-section, the bars should have the shape of an isosceles trapezoid. The width of the base is 40-60 mm, the width of the upper part is from 40 to 30 mm. The dowels can be fixed to the door with screws or nails overlapping. A more reliable option is to cut grooves for them. For the device of the grooves you will need:

• hand-held circular saw electrified;
• chisel;
• mallet;
• emery cloth.

The grooves are marked on the fixed boards. The width of the cut along the surface of wooden doors should be equal to the width between the thighs of the trapezoid at half height. On the saw, you need to set the required angle of inclination and make two cuts according to the markings. Then the solid between the cuts must be removed with a chisel and mallet. Smooth out the resulting irregularities with an emery cloth.

Hammer the dowels into the grooves with a mallet, secure with screws or nails. It is advisable to put all the joints of wooden doors on carpentry glue before assembly.

It is quite easy to make and install various designs of entrance doors with your own hands if you have a little experience with wood. With a complete lack of skills, it is advisable to start with the simplest constructions, gradually moving on to more complex and perfect ones.

A warm door is obtained when upholstery on one or both sides of this product with a layer of felt or other insulation.

Service areas in the Moscow region:

When do you need to insulate wooden doors?

Entrance door structures are a kind of shield that helps protect against a large number of external influences. Therefore, the products themselves must have maximum strength and reliability. Special characteristics are also important, guaranteeing protection against frost and heat, foreign odors and noise.

According to the advice from experts, insulation is relevant under the following circumstances:

• The structure was originally purchased without insulation, just as free-standing doors.
• The old insulation of the selected type was mounted poorly or worn out during operation.
• The wooden door lost its attractive appearance even if it was installed correctly.

Old heaters are advised to be replaced when more modern materials with improved characteristics appear. Doing the work with your own hands allows you to save a maximum of money.

Entrance door construction

What are wooden entrance structures? This is directly a canvas made of wood, a box, platbands and extensions. Don't forget the fittings. Handles, hinges, locking devices are mandatory elements of the entrance door.

The reliability and thermal insulation of the front door are of paramount importance. But do not forget that over time, any solid structure loses its characteristics. So, the main causes of malfunctions are mechanical operational influences. As a result, the doors:

• lose their shape;
• dry up;

It is important to install the doors correctly so that later they serve properly.

• begin to stagger;
• sag.

Because of this, cracks and gaps appear, which are the cause of drafts. In order to avoid unpleasant consequences, preventive work should be carried out periodically. Such as:

• adjustment of loops;
• strengthening the box;
• insulation;
• painting the canvas;
• elimination of sagging.

But before carrying out preventive work, you need to insulate and install the door itself. It is worth noting that a wooden front door has many advantages over other materials.